| BT-HT | |||||||
|---|---|---|---|---|---|---|---|
 | |||||||
| |||||||
| |||||||
BLUETOOTH SENSOR
This is a sensor that works with our BT-CAN bluetooth module.
Module parameters
| Parameter name | Value |
|---|---|
| Control parameters | Temperature, humidity |
| Temperature range | 0°C - 60°C |
| Humidity range | 0% - 99% RH |
| Power supply | 2.5V - 3V DC |
| Connection type | Bluetooth 4.2 |
| Compatible | BT-CAN |
| Case material | ABS |
| Protection | IP40 |
| Dimensions | 43x43x12,5 mm |
| Weigth | 21 g |
How to add
1. To connect the BT-HT sensor. We need to connect BT-CAN via CAN bus. Then in LT Setup in the 'Structure' tab click on the 'Edit logic' button and check if the json string is added.
Example string:
1<item addr="900:1" name="json" sub-type="btunreg" type="json"/>
2. Then open the Larnitech app and go to 'Edit mode' -> 'Setup' -> 'Bluetooth' tab. The sensor should appear.
3. Add our sensor.