Larnitech wiki page

Translations:Metaforsa2 MF-14/71/uk

Revision as of 15:32, 26 February 2024 by Support (talk | contribs) (Created page with "#De-energize the module by disconnecting the circuit breaker assembly of the load power supply and METAFORSA module supply unit. Verify the voltage is absent on the terminals...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
  1. De-energize the module by disconnecting the circuit breaker assembly of the load power supply and METAFORSA module supply unit. Verify the voltage is absent on the terminals (1), (2) of the connector wires and on the input terminals of the supply unit.
  2. Disconnect the load power supply connectors (1), (2).
  3. Disconnect the connector (3).
  4. Disconnect the connectors (4)-(6).
  5. Remove the module from the DIN-rail, releasing the latch at the bottom of the module base.
Retrieved from "https://wiki.larnitech.com/index.php?title=Translations:Metaforsa2_MF-14/71/uk&oldid=13605"