Translations:Metaforsa 3/3.plus/21/en
The basic specifications and characteristics of the module METAFORSA 3/3.plus are shown in table 1
| Specification | Meaning |
|---|---|
| Output ports | |
| Number of switched channels | 10 |
| Number of switched groups | 10 |
| Number of dimming channels | 4 |
| Commutation voltage | 0-250 V AC/DC |
| Peak load (one channel) | 16A |
| Peak load (device) | 160A |
| Max load per dimming channel | 0.5A (110W at 220V) |
| Dimmer type | MOSFET |
| Dimmer load type | R,C |
| Dimming type | trailing edge |
| Power supply cable connection type | connector |
| Permissible section of power supply cable to connect in socket: single-conductor cable multiple-conductor cable tipped multiple-conductor cable |
0.5 … 4mm2 0.5 … 4mm2 0.5 … 2.5mm2 |
| Input ports | |
| Number of discrete inputs | 28 |
| Current maximum rating on the direct-current voltage connectors | 5 mA* |
| Other | |
| Operating ambient temperature | 0 … +45°С |
| Storage/transportation temperature | -10 … +50°С |
| Permissible humidity | 0 … 95% (non-condensing) |
| Power supply | 11.5 … 27.5 V DC 24V, 0.75A Recommended |
| Maximum demand | 0.5А |
| Available interfaces | Ethernet, CAN |
| Bus type | CAN (4-wire) |
| CAN (4-wire) | 800 m** (twisted pair CAT5e) |
| CAN wire type | FTP Cat 5E |
| CAN connection type | Connector |
| Digital line maximum length | 30 m |
| Digital line wirde type | UTP/FTP Cat 5E |
| LAN maximum length | 100 m |
| LAN wire type | UTP/FTP Cat 5E |
| LAN connection type | Connector RJ-45 |
| RS485 ports qty | 1*** |
| Data transfer speed | 1200-115200 b/s*** |
| Dimensional specifications | 9U, 156x90x58 mm |
| Shell material | ABS |
| Casing | IP40 |
| Equipment installation type | DIN-rail (EN 60715) |
| Weight | 400 g |
* – Output channels should only be connected using amplifier which uses 5V PWM signal from IO output as input