SIP

Revision as of 09:14, 25 November 2021 by Erich (talk | contribs) (Created page with "<ol> <li>Make sure you have SIP licence <br>500px<br> </li> <li>Make sure you have the latest versions of LT Setup, LT Server, SIP plugin installed <br>...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
  1. Make sure you have SIP licence
    Sip1.png
  2. Make sure you have the latest versions of LT Setup, LT Server, SIP plugin installed
    Sip2.png
  3. Configure plugin before enabling.
    Sip3.png
    Send request to support for SIP registration. They will send you pair of SIP accounts
    SIP number of SIP intercom (caller) - SIP account received from support team that will be used for 3rd-party device. Ends "1". Example: 2779002761@sip.larnitech.com Cameras - You can add any camera from our system to the virtual intercom. Fill ‘Remote SIP server settings’ with:
    Server: sip.larnitech.com
    Port: 5060
    Login: SIP account received from support. It must end with 0. Example  779002760@sip.larnitech.com
    Password: password received from support team
    

    Leave ‘Local SIP server settings’ empty
    Sip4.png

  4. Save configuration and Enable the plugin.
    LOG Example:
    IC SIP: [   msg] Url 'state/SIP-NUMBER/WAITING' response code 200
    IC SIP: [   msg] Url 'state/SIP-NUMBER/WAITING' response code 200
    IC SIP: [   msg] Url 'state/SIP-NUMBER/WAITING' response code 200
    IC SIP: [   msg] Url 'state/SIP-NUMBER/WAITING' response code 200
    IC SIP: [   msg] Url 'state/SIP-NUMBER/WAITING' response code 200 - Calling (response code 200 - OK)
    IC SIP: [   msg]          SIP-NUMBER: [2028:  0] device mode: TALKING - Answer and Talking
    IC SIP: [   msg] Url 'state/SIP-NUMBER/WAITING' response code 200
    IC SIP: [   msg] Url 'state/SIP-NUMBER/WAITING' response code 200
    IC SIP: [   msg]          SIP-NUMBER: device mode: IDLE
    IC SIP: [   msg] Url 'state/SIP-NUMBER/HANGUP' response code 200 - Cancel Call