Larnitech wiki page

Translations:DW-010/16/en

Revision as of 13:48, 7 January 2022 by FuzzyBot (talk | contribs) (Importing a new version from external source)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Module shut-off and deinstallation procedure

  1. Disconnect the CAN connector.
  2. Disconnect the input/output connectors.
  3. Remove the module from the DIN rail, releasing the latch at the bottom of the module base.
Retrieved from "https://wiki.larnitech.com/index.php?title=Translations:DW-010/16/en&oldid=5688"