Larnitech wiki page

Translations:BW-RS232/10/en

Revision as of 14:10, 9 January 2022 by FuzzyBot (talk | contribs) (Importing a new version from external source)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
  1. Connect the interface connector.
  2. Connect the CAN connector.
  3. Configure the module using LT setup.
  4. Check all equipment for proper operation.
Retrieved from "https://wiki.larnitech.com/index.php?title=Translations:BW-RS232/10/en&oldid=6559"