CW-M-II/CW-M-II (черный)

CW-M-II.C
Sensors Control parameters motion
Other Supply voltage 11.5...27.5 V DC Dimentions 51x51x37 mm

ДАТЧИК ДВИЖЕНИЯ

Модуль содержит датчик движения.

Изображение модуля

Область обнаружения движения

Размеры модуля

Параметры модуля

Parameter name	Value
Input channels qty
Input/output channels qty
0-10 input port quantity
Buttons
LED Buttons
Number of sensor inputs
Number of dry contact inputs
RS485 ports qty
RS232 ports qty
UART ports qty
M-BUS port quantity
Pulse inputs quantity
DALI ports qty
DALI-line voltage supply
Peak current of DALI-line power supply
Peak current in DALI-line
Maximum DALI devices quantity
Dimming channels qty
Output channels qty
0-10 output port quantity
Analog output channels qty
Output
Digital line maximum length
Discrete input channels qty
Digital input channels qty
Speakers
Max power output audio channel
Camera
IR lighting
Card reader
Connection type
Protocols
Backlight voltage
Load type
Dimmer load type
Supported sensors
Input voltage
Current type
Adjustment type
Max load
Min load
Max load per channel
Max load per group
Max load per device
Control parameters	Motion
Angle of vision IR	°
Angle of motion	°
Temperature measuring range	°C
Humidity measuring range
Dimmer type
Dimming type
Voltage that may be applied to the input channels
Max output switching voltage
Max output switching current
Power supply	11.5 … 27.5 V DC from CAN
Max current(24V)	50 mA
Max current(13V)
Max detection distance
Max IR distance
Max BT distance
Max current
Relay
Data transfer speed
Permissible section of power supply cable to connect in socket:
Sensors VCC output
Sensors max VCC current
R1-R2 inputs max current
Push-button/reed switches line recommended length
Temperature sensor line max length
Sensor cable length
Sensors line max length
Bus type	CAN (4-wire)
Compatible with
Output voltage
Output current
Equipment installation type	Cell.
Mounting
Max cabel lenght
Case material	ABS
Protection	IP40
Temperature range	-10 … +50 °C
Size	51x51x37 mm
Weight	25g

* -

** -

*** -

1 -

2 -

3 -

HW settings

Name	Type, range	SUBID	Default	Description
scale	float (0…8)	SubID of sensor	1	multiplier determines the slope of values (except temperature sensors) Example: 1hw="scale='1.1'"
pwr	integer (1…100)	SubID of IR-transmitter	100	Power of infrared transmitter signal. Example: 1hw="pwr=50"

1<item addr="410:30" cfgid="78" name="Motion" hw="scale='3.2'" type="motion-sensor" uniq_id="820"/>
2<item addr="410:98" cfgid="78" name="Temperature" system="yes" type="temperature-sensor" uniq_id="822"/>