Translations:QR Description/1/en
The system supports the transfer of settings in JSON format. You can only use the parameters that you need.
Parameters description
| Parameter | Description |
|---|---|
| msg | Message mask (4 bytes, least significant half bits per line are used) |
| Email for cloud | |
| mode-is-remote | Connection mode (0 - local, 1 - remote, 2 - auto, 3 - cloud) |
| e-passw | Password from cloud |
| srv-addr | Local server address |
| srv-addr-remote | Remote server address |
| pass-key | Access key to the server |
| su | Expert settings |
| upnp-client | Use your devise as upnp client |
| blinds-s | Add blinds tab |
| upnp-pl-upload | Allow upnp playlist upload |
| upnp-renderer | Use your devise as upnp penderer |
| beep-sound | Allow to use sound feedback |
| beep-vibro | Allow to use vibration feedback |
| screen-lock-mode | Disable auto-lock (0 - no, 1 - yes, 2 - yes when charging) |
| screen-saver | Darken the screen (1-30 min, in the application you can set 1, 2, 5, 10, 20, 30) |
| srv-serial | Serial of server |
| i-m-i | Ignore missed calls in the intercom |
| language | Language |
Example
1{"msg":"0x0f0f0f0f","e-mail":"123@456","mode-is-remote":"1","e-passw":"123456","srv-addr":"192.168.1.124","srv-addr-remote":"192.168.12.74","pass-key":"0000000000000000","su":"1","upnp-client":"1","blinds-s":"1","upnp-pl-upload":"1","upnp-renderer":"1","beep-sound":"1","beep-vibro":"1","screen-lock-mode":"1","screen-saver":"2","server-as-proxy":"1","optimize-tcp":"1","srv-serial":"1234567890","imi":"1","language":"ru"}