RGB-подсветка
Пример описания в XML
1<item addr="100:10" name="chandelier" type="rgb-lamp" auto-period="600" system="yes">
2 <linked addr="101:16"/> // привязан к кнопке с адресом 101:1
3 <automation ……/> // установить автоматизацию для этого элемента
4</item>
1<item addr="100:10" name="chandelier" type="rgb-lamp" auto-period="600" color-temp="307:4" color-white="307:5">
2 <linked addr="101:1"/> // привязан к кнопке с адресом 101:1
3 <automation ……/> // установить автоматизацию для этого элемента
4</item>
color-temp="dimmer ID:SUBID" – для добавления и управления полосой яркости диммера с температурой.
color-temp="dimmer ID:SUBID" – для добавления и управления "белой" полосой яркости диммера.
Состояние устройства (4 байта)
| Byte number | description |
|---|---|
| 0 | Device status. Bit 0: 0 – off 1 – on Bit 3: 0 – automation is disactivated 1 – automation is activated Bit 7: 0 – no alarm 1 – alarm (relating to temperature) |
| 1 | V – brightness (VSH Color System) 0..250 |
| 2 | S – contrast (VSH Color System) 0..250 |
| 3 | Н – colour hue (VSH Color System) 0..250 |
Possible variants of setting the status
single-byte
| byte | description |
|---|---|
| 0 | Status (on/off) 0 – off 1 – on 0xFF – Change the status for the opposite one |
4-bytes
| byte | description |
|---|---|
| 0 | Status (on/off) 0 – off 1 – on 0xFE – do not change the status of this byte 0xFF – Change the status for the opposite one |
| 1 | Brightness 0 – off 1..250 – brightness 0xFE – do not change the status of this byte |
| 2 | contrast 0 – off 1..250 – brightness 0xFE – do not change the status of this byte |
| 3 | colour hue |
5-bytes
| byte | description |
|---|---|
| 0 | Status (on/off) 0 – off 1 – on 0xFE – do not change the status of this byte 0xFF – Change the status for the opposite one |
| 1 | Brightness 0 – off 1..250 – brightness 0xFE – do not change the status of this byte |
| 2 | Сontrast 0 – off 1..250 – сontrast 0xFE – do not change the status of this byte |
| 3 | Сolour hue 0 – off 1..250 – сolour hue 0xFE – do not change the status of this byte |
| 4 | Time required for changing the status, x0.1 seconds (runtime=100, apply as 10 seconds) |