Changes

Byte media point status:

Byte media point status:

0 – SpeakerStatusOffsetState, 0 – off, 1 – is playing, 2 – error, 4 – pause;

:0 – SpeakerStatusOffsetState, 0 – off, 1 – is playing, 2 – error, 4 – pause;

1 – SpeakerStatusOffsetVolume, sound level;

:1 – SpeakerStatusOffsetVolume, sound level;

2 – SpeakerStatusOffsetMute, Mute status;

:2 – SpeakerStatusOffsetMute, Mute status;

3 – SpeakerStatusOffsetBalanse, balance;

:3 – SpeakerStatusOffsetBalanse, balance;

4 – SpeakerStatusOffsetPriority, priority;

:4 – SpeakerStatusOffsetPriority, priority;

5 – SpeakerStatusOffsetMsDuration, track length;

:5 – SpeakerStatusOffsetMsDuration, track length;

9 – SpeakerStatusOffsetMsDuration, track current position;

:9 – SpeakerStatusOffsetMsDuration, track current position;

13 – SpeakerStatusOffsetSyncMasterAddr, device address synchronised with media point;

:13 – SpeakerStatusOffsetSyncMasterAddr, device address synchronised with media point;

13 – SpeakerStatusOffsetSyncMasterSubId, device SubID synchronised with media point;

:13 – SpeakerStatusOffsetSyncMasterSubId, device SubID synchronised with media point;

14 – SpeakerStatusOffsetSyncMasterId, device ID synchronised with media point;

:14 – SpeakerStatusOffsetSyncMasterId, device ID synchronised with media point;

16 – SpeakerStatusOffsetSyncSlaveCount, number of devices synchronised with media point. If non-zero values then the devices addresses will be recorded after URL;

:16 – SpeakerStatusOffsetSyncSlaveCount, number of devices synchronised with media point. If non-zero values then the devices addresses will be recorded after URL;

17 – SpeakerStatusOffsetURL, tracked URL reference.

:17 – SpeakerStatusOffsetURL, tracked URL reference.

The comment as for Multiroom tools tab in the interface:

The comment as for Multiroom tools tab in the interface: