1,970
edits
Changes
→HW settings
<syntaxhighlight lang="xml" line>
<syntaxhighlight lang="xml" line>
hw="cfg='9600/8N1' term=1"
hw="cfg='9600/8N1' term=1"
</syntaxhighlight>
|-
|mbus|| params ||2|| - || Sets the polled counters on the MBUS
mbus='<address1>:<mask1>:<period1> <address2>:<mask2>:<period2>'
where:
*<addressX> - counter address on the bus
*<maskX> - The bit mask specifies which parameters of this counter will be included in the report and will be sent by the module to the server. Here the lowest bit specifies the presence of general information in the report, and the remaining 31 bits correspond to parameters from "0" to "30". This field can be skipped. By default, it is 0xFFFFFFFFFFFF
*<period2> - the polling period for this counter in minutes. This field can be skipped. The default value is 15. The range of possible values is from 10 to 1440
Example:
<syntaxhighlight lang="xml" line>
<item addr="326:2" cfgid="135" hw="mbus='1:0xFFEC:20'" name="MBUS" type="com-port"/>
</syntaxhighlight>
</syntaxhighlight>
|}
|}