1,970
edits
Changes
→HW settings
sens='180'
sens='180'
</syntaxhighlight>
</syntaxhighlight>
|-
|test||int(0,1)||sensors subId||1||0 - Disable the test signal to detect the presence of the sensor
|}
|}
* Removing HW does not return the above parameters to their default values.To return to their default values, they must be set explicitly.
* Removing HW does not return the above parameters to their default values.To return to their default values, they must be set explicitly.
** Green and blue cannot be used at the same time. Green has priority.
** Green and blue cannot be used at the same time. Green has priority.