editor, translation-admin, translator
4,754
edits
Changes
Marked this version for translation
<languages/>
<languages/>
<translate>
<translate>
<!--T:1-->
{{RevisionChanger | hasA = 1 | hasC = 1}}
{{RevisionChanger | hasA = 1 | hasC = 1}}
{{Infobox module
{{Infobox module
}}
}}
==SERIAL INTERFACE ADAPTER==
==SERIAL INTERFACE ADAPTER== <!--T:2-->
<!--T:3-->
This module is designed for interface adjustment between the devices which have the UART interface (TTL levels) and the Smart Home system.
This module is designed for interface adjustment between the devices which have the UART interface (TTL levels) and the Smart Home system.
<!--T:4-->
<div class="caution">
<div class="caution">
CAUTION! All work related to the installation, connection, setting up, service and support must be carried out by qualified personnel with sufficient skills and experience in working with electrical equipment.
CAUTION! All work related to the installation, connection, setting up, service and support must be carried out by qualified personnel with sufficient skills and experience in working with electrical equipment.
</div>
</div>
==Overview==
==Overview== <!--T:5-->
<!--T:6-->
[[File:UARTC VIEW.png|300px]]
[[File:UARTC VIEW.png|300px]]
==Module dimensions==
==Module dimensions== <!--T:7-->
<!--T:8-->
[[File:UARTC DIM.png|500px]]
[[File:UARTC DIM.png|500px]]
==Example of connection==
==Example of connection== <!--T:9-->
<!--T:10-->
[[File:UARTC EXA.png|300px]]
[[File:UARTC EXA.png|300px]]
==Module parameters==
==Module parameters== <!--T:11-->
<!--T:12-->
{{ Mp
{{ Mp
| uartqty = 1
| uartqty = 1
}}
}}
==Indication of module operation==
==Indication of module operation== <!--T:13-->
{{indicationold}}
{{indicationold}}
==Module installation and connection procedure==
==Module installation and connection procedure== <!--T:14-->
#Install the module in the switchboard on the DIN rail and fix it with the special latch on the module base.
#Install the module in the switchboard on the DIN rail and fix it with the special latch on the module base.
#Connect the X1 connector.
#Connect the X1 connector.
#Check all equipment for proper operation.
#Check all equipment for proper operation.
==Module shut-off and deinstallation procedure==
==Module shut-off and deinstallation procedure== <!--T:15-->
#Disconnect the CAN connector.
#Disconnect the CAN connector.
#Disconnect the X1 connector.
#Disconnect the X1 connector.
#Remove the module from the DIN rail, releasing the latch at the bottom of the module base.
#Remove the module from the DIN rail, releasing the latch at the bottom of the module base.
==HW settings==
==HW settings== <!--T:16-->
{|class="wikitable"
{|class="wikitable"
|-
|-