editor, translation-admin, translator
4,754
edits
Changes
Marked this version for translation
<languages/>
<languages/>
<translate>
<translate>
<!--T:1-->
{{RevisionChanger | hasA = 1 | hasC = 1}}
{{RevisionChanger | hasA = 1 | hasC = 1}}
{{Infobox module
{{Infobox module
}}
}}
==MODULE FOR DEVICES WITH 0-10V INPUT OR OUTPUT==
==MODULE FOR DEVICES WITH 0-10V INPUT OR OUTPUT== <!--T:2-->
<!--T:3-->
This module allows connecting devices with 0-10V inputs and outputs to the Smart Home system
This module allows connecting devices with 0-10V inputs and outputs to the Smart Home system
==Features==
==Features== <!--T:4-->
*4x0-10V outputs
*4x0-10V outputs
*2x0-10V inputs
*2x0-10V inputs
<!--T:5-->
<div class="caution">
<div class="caution">
CAUTION! All work related to the installation, connection, setting up, service and support must be carried out by qualified personnel with sufficient skills and experience in working with electrical equipment.
CAUTION! All work related to the installation, connection, setting up, service and support must be carried out by qualified personnel with sufficient skills and experience in working with electrical equipment.
</div>
</div>
==Overview==
==Overview== <!--T:6-->
<!--T:7-->
[[File:010C VIEW.png|300px]]
[[File:010C VIEW.png|300px]]
==Module dimensions==
==Module dimensions== <!--T:8-->
<!--T:9-->
[[File:010C DIM.png|500px]]
[[File:010C DIM.png|500px]]
==Connection of 6 0-10V devices==
==Connection of 6 0-10V devices== <!--T:10-->
<!--T:11-->
[[File:010C EXA.png|500px]]
[[File:010C EXA.png|500px]]
==Module parameters==
==Module parameters== <!--T:12-->
<!--T:13-->
{{ Mp
{{ Mp
| inqty = 2
| inqty = 2
}}
}}
==Indication of module operation==
==Indication of module operation== <!--T:14-->
===Bootloader===
===Bootloader===
{{indication| textBBB= Waiting for bootloader command}}
{{indication| textBBB= Waiting for bootloader command}}
}}
}}
==Module installation and connection procedure==
==Module installation and connection procedure== <!--T:15-->
#Install the module in the switchboard on the DIN rail and fix it with the special latch on the module base.
#Install the module in the switchboard on the DIN rail and fix it with the special latch on the module base.
#Connect the input/output connectors.
#Connect the input/output connectors.
#Check all equipment for proper operation.
#Check all equipment for proper operation.
==Module shut-off and deinstallation procedure==
==Module shut-off and deinstallation procedure== <!--T:16-->
#Disconnect the CAN connector.
#Disconnect the CAN connector.
#Disconnect the input/output connectors.
#Disconnect the input/output connectors.
#Remove the module from the DIN rail, releasing the latch at the bottom of the module base.
#Remove the module from the DIN rail, releasing the latch at the bottom of the module base.
==HW settings==
==HW settings== <!--T:17-->
{|class="wikitable"
{|class="wikitable"
|-
|-