editor, translation-admin, translator
4,754
edits
Changes
Marked this version for translation
<languages/>
<languages/>
<translate>
<translate>
<!--T:1-->
{{RevisionChanger | hasA = 1 | hasC = 1}}
{{RevisionChanger | hasA = 1 | hasC = 1}}
{{Infobox module
{{Infobox module
}}
}}
==RS485 INTERFACE ADAPTER==
==RS485 INTERFACE ADAPTER== <!--T:2-->
<!--T:3-->
This module is designed for interface adjustment between the
This module is designed for interface adjustment between the
devices which have the RS485 interface and the Smart Home system.
devices which have the RS485 interface and the Smart Home system.
The module has an internal 120Ω terminator resistor.
The module has an internal 120Ω terminator resistor.
==Features==
==Features== <!--T:4-->
<!--T:5-->
*Supported protocols:
*Supported protocols:
**ModBus RTU
**ModBus RTU
*1200 – 115200 baud rate
*1200 – 115200 baud rate
<!--T:6-->
<div class="caution">
<div class="caution">
CAUTION! All work related to the installation, connection, setting up, service and support must be carried out by qualified personnel with sufficient skills and experience in working with electrical equipment.
CAUTION! All work related to the installation, connection, setting up, service and support must be carried out by qualified personnel with sufficient skills and experience in working with electrical equipment.
</div>
</div>
==Example of connection==
==Example of connection== <!--T:7-->
<!--T:8-->
[[File:BWRS485C EXA.png|500px]]
[[File:BWRS485C EXA.png|500px]]
==Module parameters==
==Module parameters== <!--T:9-->
<!--T:10-->
{{ Mp
{{ Mp
| rs485qty = 1
| rs485qty = 1
}}
}}
==Module installation and connection procedure==
==Module installation and connection procedure== <!--T:11-->
<!--T:12-->
#Connect the interface connector.
#Connect the interface connector.
#Connect the CAN connector.
#Connect the CAN connector.
#Check all equipment for proper operation.
#Check all equipment for proper operation.
==Module shut-off and deinstallation procedure==
==Module shut-off and deinstallation procedure== <!--T:13-->
<!--T:14-->
#Disconnect the CAN connector.
#Disconnect the CAN connector.
#Disconnect the interface connector.
#Disconnect the interface connector.
==HW settings==
==HW settings== <!--T:15-->
{|class="wikitable"
{|class="wikitable"
|-
|-