editor, translation-admin, translator
4,754
edits
Changes
Marked this version for translation
<languages/>
<languages/>
<translate>
<translate>
<!--T:1-->
{{RevisionChanger | hasA = 1 | hasC = 1}}
{{RevisionChanger | hasA = 1 | hasC = 1}}
{{Infobox module
{{Infobox module
}}
}}
==SERIAL PORT ADAPTER==
==SERIAL PORT ADAPTER== <!--T:2-->
<!--T:3-->
This module is designed for interface adjustment between the devices
This module is designed for interface adjustment between the devices
which have the UART interface (TTL levels) and the Smart Home system.
which have the UART interface (TTL levels) and the Smart Home system.
<!--T:4-->
<div class="caution">
<div class="caution">
CAUTION! All work related to the installation, connection, setting up, service and support must be carried out by qualified personnel with sufficient skills and experience in working with electrical equipment.
CAUTION! All work related to the installation, connection, setting up, service and support must be carried out by qualified personnel with sufficient skills and experience in working with electrical equipment.
</div>
</div>
==Example of connection==
==Example of connection== <!--T:5-->
<!--T:6-->
[[File:BWUARTC EXA.png|500px]]
[[File:BWUARTC EXA.png|500px]]
==Module parameters==
==Module parameters== <!--T:7-->
<!--T:8-->
{{ Mp
{{ Mp
| uartqty = 1
| uartqty = 1
}}
}}
==Module installation and connection procedure==
==Module installation and connection procedure== <!--T:9-->
<!--T:10-->
#Connect the interface connector.
#Connect the interface connector.
#Connect the CAN connector.
#Connect the CAN connector.
#Check all equipment for proper operation.
#Check all equipment for proper operation.
==Module shut-off and deinstallation procedure==
==Module shut-off and deinstallation procedure== <!--T:11-->
<!--T:12-->
#Disconnect the CAN connector.
#Disconnect the CAN connector.
#Disconnect the interface connector.
#Disconnect the interface connector.
==HW settings==
==HW settings== <!--T:13-->
{|class="wikitable"
{|class="wikitable"
|-
|-