editor, translation-admin, translator
4,754
edits
Changes
Climate control settings/ru (view source)
Revision as of 11:54, 15 January 2022
, 11:54, 15 January 2022Created page with "Настройки климат-контроля"
<languages/>
1. Open LT Setup, in General tab click on Climate control<br>
[[File:Screenshot_2.png|200px]]<br>
2. Click on +Add button<br>
[[File:Screenshot_3.png|200px]]<br>
3. In the pop-up window, fill the fields below, Save changes
*Name - any you like
*Module - device, that will be controlling the climate
*Location - the room, in which your climate will be situated<br>
[[File:Screenshot_4.png|400px]]<br>
4. In the new window, you will set settings for the climate.<br>
In the Sensors panel, choose sensors from drop-down list for Temperature/Humidity/Warm floor/CO2.<br>
If you don`t have Humidity or CO2 sensors, for example, leave the fields empty.<br>
[[File:Screenshot_5.png|700px]]<br>
5. When you choose one, click on+, to add it !!<br>
[[File:Screenshot_6.png|700px]]<br>
6. After this, you will see the added sensor.<br>
If you won`t add a sensor like this, you can`t add devices (radiators, etc) to work with it.<br>
For Humidity/Warm floor/CO2 tabs procedure the same. You can use one sensor for some tabs.<br>
[[File:Screenshot_7.png|700px]]<br>
7. After the Sensors tab, move to Automation settings.<br>
There you can add devices to any Automation mode (Eco, Comfort, Hot) or create new ones.<br>
[[File:Screenshot 8.png|300px]]<br>
8. Click on +Add device, choose your object and Save settings.<br>
[[File:Screenshot 9.png|500px]]<br>
9. After Save, your device will appear below the tab Temperature. You can add as many devices as you have.<br>
[[File:Screenshot 10.png|600px]]<br>
10. For the next tabs and modes, identic procedure.<br>
[[File:Screenshot 11.png|500px]]<br>
11. To use a warm floor, you need to change the sub-type of Radiator. It`s available from the app.<br>
Open Larnitech app, find an object that you wants to control the warm floor, turn on Edit mode, make a long press and then click on Edit item.<br>
In the Advanced tab, change the type of the device, and save changes.<br>
[[File:Screenshot 013.png|300px]] [[File:Screenshot 14.png|350px]]<br>
12. Green asterisk - shows the mode, that you choosed for. You can change it in the app.<br>
[[File:Screenshot 15.png|280px]] [[File:Screenshot 17.png|200px]] [[File:Screenshot 16.png|200px]]<br>
13. All added objects for climate control, will appear below the main widget.<br>
[[File:Screenshot 18.png|300px]]<br>
14. Launch the object, all added devices should turn on.<br>
If some object doesn`t turn on, check the settings of modes (Eco, Comfort, Hot) in LT setup - added device accordings to each type of heat/cool, warm floor, etc.<br>
[[File:Screenshot 19.png|300px]]
1. Open LT Setup, in General tab click on Climate control<br>
[[File:Screenshot_2.png|200px]]<br>
2. Click on +Add button<br>
[[File:Screenshot_3.png|200px]]<br>
3. In the pop-up window, fill the fields below, Save changes
*Name - any you like
*Module - device, that will be controlling the climate
*Location - the room, in which your climate will be situated<br>
[[File:Screenshot_4.png|400px]]<br>
4. In the new window, you will set settings for the climate.<br>
In the Sensors panel, choose sensors from drop-down list for Temperature/Humidity/Warm floor/CO2.<br>
If you don`t have Humidity or CO2 sensors, for example, leave the fields empty.<br>
[[File:Screenshot_5.png|700px]]<br>
5. When you choose one, click on+, to add it !!<br>
[[File:Screenshot_6.png|700px]]<br>
6. After this, you will see the added sensor.<br>
If you won`t add a sensor like this, you can`t add devices (radiators, etc) to work with it.<br>
For Humidity/Warm floor/CO2 tabs procedure the same. You can use one sensor for some tabs.<br>
[[File:Screenshot_7.png|700px]]<br>
7. After the Sensors tab, move to Automation settings.<br>
There you can add devices to any Automation mode (Eco, Comfort, Hot) or create new ones.<br>
[[File:Screenshot 8.png|300px]]<br>
8. Click on +Add device, choose your object and Save settings.<br>
[[File:Screenshot 9.png|500px]]<br>
9. After Save, your device will appear below the tab Temperature. You can add as many devices as you have.<br>
[[File:Screenshot 10.png|600px]]<br>
10. For the next tabs and modes, identic procedure.<br>
[[File:Screenshot 11.png|500px]]<br>
11. To use a warm floor, you need to change the sub-type of Radiator. It`s available from the app.<br>
Open Larnitech app, find an object that you wants to control the warm floor, turn on Edit mode, make a long press and then click on Edit item.<br>
In the Advanced tab, change the type of the device, and save changes.<br>
[[File:Screenshot 013.png|300px]] [[File:Screenshot 14.png|350px]]<br>
12. Green asterisk - shows the mode, that you choosed for. You can change it in the app.<br>
[[File:Screenshot 15.png|280px]] [[File:Screenshot 17.png|200px]] [[File:Screenshot 16.png|200px]]<br>
13. All added objects for climate control, will appear below the main widget.<br>
[[File:Screenshot 18.png|300px]]<br>
14. Launch the object, all added devices should turn on.<br>
If some object doesn`t turn on, check the settings of modes (Eco, Comfort, Hot) in LT setup - added device accordings to each type of heat/cool, warm floor, etc.<br>
[[File:Screenshot 19.png|300px]]