Translations:Metaforsa2 MF-14/21/en
The basic specifications and characteristics of the module METAFORSA MF-14.A are shown in table 1
Specification | Meaning |
---|---|
Output ports | |
Number of switched channels | 10 |
Number of switched groups | 10 |
Number of dimming channels | 4 |
Commutation voltage | 0-250 V AC/DC |
Peak load (one channel) | 16A |
Peak load (device) | 160A |
Max load per dimming channel | 0.5A (110W at 220V) |
Dimmer type | MOSFET |
Dimmer load type | R,C |
Dimming type | trailing edge |
Power supply cable connection type | connector |
Permissible section of power supply cable to connect in socket: single-conductor cable multiple-conductor cable tipped multiple-conductor cable |
0.5 … 4mm2 0.5 … 4mm2 0.5 … 2.5mm2 |
Input ports | |
Number of discrete inputs | 24 |
Number of digital inputs | 4 |
Current maximum rating on the direct-current voltage connectors | 50mA |
Other | |
Operating ambient temperature | 0 … +45°С |
Storage/transportation temperature | -20 … +60°С |
Permissible humidity | 0 … 95% (non-condensing) |
Power supply | 12 … 27.5 V DC 24V, 0.75A Recommended |
Maximum demand | 0.5А |
Available interfaces | Ethernet, CAN, OneWire |
Bus type | CAN (4-wire) |
CAN (4-wire) | 800 m* (twisted pair 5 cat) |
CAN wire type | FTP Cat 5E |
CAN connection type | connector |
Digital line maximum length | 30 m |
Digital line wirde type | UTP/FTP Cat 5E |
LAN maximum length | 100 m |
LAN wire type | UTP/FTP Cat 5E |
LAN connection type | Connector RJ-45 |
Dimensional specifications | 9U, 156x110x58 mm |
Shell material | ABS plastic |
Casing | IP40 |
Equipment installation type | DIN-rail (EN 60715) |
Weight | 400 g |
* – installing additional power supply units is required for long lines; the maximum length of the line may be reduced by various interference factors