Translations:DW-DALI2.C/DW-DALI.C/20/en

From Larnitech wiki page
Revision as of 11:58, 8 January 2022 by FuzzyBot (talk | contribs) (Importing a new version from external source)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Module installation and connection procedure

CAUTION! You must precisely follow the recommendations listed in the «Safety Requirements» section of this manual.

  1. Install the module in the switchboard on the DIN-rail and secure it with special latches available on the module base.
  2. Connect the CAN-bus (4).
  3. Connect the DALI-bus (1).
  4. Connect the DALI power connector (2).
  5. Energise the module power supply (24 V).
Retrieved from "https://wiki.larnitech.com/index.php?title=Translations:DW-DALI2.C/DW-DALI.C/20/en&oldid=5839"