Translations:DW-DALI2.C/DW-DALI.C/13/ru
	
		From Larnitech wiki page
		(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
| Parameter name | Value | 
| Input channels qty |  | 
| Input/output channels qty |  | 
| 0-10 input port quantity |  | 
| Buttons |  | 
| LED Buttons |  | 
| Number of sensor inputs |  | 
| Number of dry contact inputs |  | 
| RS485 ports qty |  | 
| RS232 ports qty |  | 
| UART ports qty |  | 
| M-BUS port quantity |  | 
| Pulse inputs quantity |  | 
| DALI ports qty | 2 | 
| DALI-line voltage supply | 10.5 – 22.5 V DC | 
| Peak current of DALI-line power supply | 1A | 
| Peak current in DALI-line | 300 mА | 
| Maximum DALI devices quantity | 641 | 
| Dimming channels qty |  | 
| Output channels qty |  | 
| 0-10 output port quantity |  | 
| Analog output channels qty |  | 
| Output |  | 
| Digital line maximum length |  | 
| Discrete input channels qty |  | 
| Digital input channels qty |  | 
| Speakers |  | 
| Max power output audio channel |  | 
| Camera |  | 
| IR lighting |  | 
| Card reader |  | 
| Connection type |  | 
| Protocols |  | 
| Backlight voltage |  | 
| Load type |  | 
| Dimmer load type |  | 
| Supported sensors |  | 
| Input voltage |  | 
| Current type |  | 
| Adjustment type |  | 
| Max load |  | 
| Min load |  | 
| Max load per channel |  | 
| Max load per group |  | 
| Max load per device |  | 
| Control parameters |  | 
| Angle of vision IR | ° | 
| Angle of motion | ° | 
| Temperature measuring range | °C | 
| Humidity measuring range |  | 
| Dimmer type |  | 
| Dimming type |  | 
| Voltage that may be applied to the input channels |  | 
| Max output switching voltage |  | 
| Max output switching current |  | 
| Power supply | 11.5 … 27.5 V DC from CAN | 
| Max current(24V) | 30 mA | 
| Max current(13V) |  | 
| Max detection distance |  | 
| Max IR distance |  | 
| Max BT distance |  | 
| Max current |  | 
| Relay |  | 
| Data transfer speed |  | 
| Permissible section of power supply cable to connect in socket: |  | 
| Sensors VCC output |  | 
| Sensors max VCC current |  | 
| R1-R2 inputs max current |  | 
| Push-button/reed switches line recommended length |  | 
| Temperature sensor line max length |  | 
| Sensor cable length |  | 
| Sensors line max length |  | 
| Bus type | CAN (4-wire) | 
| Compatible with |  | 
| Output voltage |  | 
| Output current |  | 
| Equipment installation type | DIN rail (EN 60715) | 
| Mounting |  | 
| Max cabel lenght |  | 
| Case material | ABS | 
| Protection | IP40 | 
| Temperature range | -10 … +50 °C | 
| Size | 2U, 35x97x58 mm | 
| Weight | 75g | 
* -  
** -  
*** -  
1 - subject to compliance with other parameters
2 - 
3 - 
Общая структура модуля
