SIP

1. Send request to support for SIP registration. They will send you pair of SIP accounts
2. Make sure you have SIP licence
   
   
3. Make sure you have the latest versions of LT Setup, LT Server, SIP plugin installed
   
   
4. Configure plugin before enabling.
   
   
5. Fill settings
   
   
   SIP number of SIP intercom (caller) - SIP account received from support team that will be used for 3rd-party device.
   Ends "1". Example: 2779002761@sip.larnitech.com
   Cameras - You can add any camera from our system to the virtual intercom.
   Server: sip.larnitech.com
   Port: 5060
   Login: SIP account received from support. It must end with 0. Example 779002760@sip.larnitech.com
   Password: password received from support team
   
   Leave ‘Local SIP server settings’ empty
6. Save configuration and Enable the plugin.
   LOG Example:

   IC SIP: [   msg] Url 'state/SIP-NUMBER/WAITING' response code 200
   IC SIP: [   msg] Url 'state/SIP-NUMBER/WAITING' response code 200
   IC SIP: [   msg] Url 'state/SIP-NUMBER/WAITING' response code 200
   IC SIP: [   msg] Url 'state/SIP-NUMBER/WAITING' response code 200
   IC SIP: [   msg] Url 'state/SIP-NUMBER/WAITING' response code 200 - Calling (response code 200 - OK)
   IC SIP: [   msg]          SIP-NUMBER: [2028:  0] device mode: TALKING - Answer and Talking
   IC SIP: [   msg] Url 'state/SIP-NUMBER/WAITING' response code 200
   IC SIP: [   msg] Url 'state/SIP-NUMBER/WAITING' response code 200
   IC SIP: [   msg]          SIP-NUMBER: device mode: IDLE
   IC SIP: [   msg] Url 'state/SIP-NUMBER/HANGUP' response code 200 - Cancel Call