Translations:Scripts database/8/en

From Larnitech wiki page
Revision as of 15:09, 19 January 2022 by FuzzyBot (talk | contribs) (Importing a new version from external source)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Security

Script name Description Available DE-MG Available Metaforsa
Control of the electronic lock by the reader Opens the lock by reading the magnetic key + -*
Imitation of presence Let everyone around you think that you did not go anywhere. Select some devices and enable settings for each + -*
Morze cod Select the code for the button on which the script is executed + -*
Security script Activating the script turns on security mode. You can select up to 5 areas, with up to 3 motion sensors and 3 reed switches in each one. You can also set a password. When the script is activated, the security mode starts after 20 seconds. However, if at least one of the selected reed switches is not closed, then the script does ot start and the interface displays the name of the area in which the reed switch is not closed. In security mode, when a motion sensor or reed switch is triggered, a message appears in the interface with the area name and the pre-chosen scenario is executed. If the area is set as an entrance area, the system will allow 20 seconds to enter the password before the alarm is triggered. You need to set the threshold of the motion sensor. You can also postpone the sensor recovery time. + -*
Self-diagnosis Self-diagnostics of selected modules. You can add this script to the script I left + -*