Права доступа к элементам
Разрешения могут быть созданы для всех групп пользователей, также поддерживается вложенность, например, «элемент», который не редактируется или не виден для некоторых пользователей, может быть создан в «области».
The following construction is used for creating the users groups
1<user-groups groups="GROUP_NAME"/>
For adding users to the users group the following construction is used
1<users>
2 <USER1 groups="GROUP_NAME" name="USER1" password="1111"/>
3 <USER2 groups="GROUP_NAME" name="USER2" password="2222" permissions="7"/>
4 <USER2 password="2222" single-action="true"/>
5</users>
Within the tag all the users, their groups are entered, name and password attributes are specified for each concrete user. single-action="true" – the rules are applied only for one action (e.g. script activating)
User attribute "permissions" is responsible for accessing the "Advanced" tab in settings, Edit mode and "Setup" room
| Bit number | Description |
|---|---|
| 0 | Access to "Edit Mode" |
| 1 | Access to "Advanced" tab |
| 2 | Access to "Setup" room |
Permissions parameter is used for restricting the access to the concrete element, for example
1<area name="AREA_NAME" permissions="*:ve-;USER1:ve+">
2 <item addr="311:12" name="LAMP31112" type="lamp" permissions="*:e+;USER1:e-"/>
3</area>
In this part of code is specified that AREA_NAME area is visible and editable for USER1,
for all other users (in our case only USER2) it is invisible.
"item" of lamp type with LAMP31112 name which is located in "area" with AREA_NAME name has its own authorisation for a concrete user,
it is specified in the code that "item" of lamp type with LAMP31112 name is visible for USER1 but USER1 cannot edit this "item".
All other users (in our case only for user USER2) can both see and edit this item.
Permissions parameters and their description
- "ve+" – is visible and can be edited
- "ve-" – is invisible and can’t be edited
- "v+" – is visible
- "v-" – is invisible
- "e+" – can be edited
- "e-" – can’t be edited
edit-mode-users="User1;User2" is to be added to "smarthouse" tag for setting mode password (interface 3).
Also you can use the password for the items to protect them from accidental clicking
Example:
1<item addr="311:12" name="LAMP31112" type="lamp" password="1234"/>
After setting the password, when you click on the "LAMP31112" item, the keyboard for entering the password appears to turn on/off the lamp.