Difference between revisions of "BW-RS232"

From Larnitech wiki page
Jump to navigation Jump to search
(Marked this version for translation)
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
 +
<languages/>
 +
<translate>
 +
<!--T:1-->
 
{{RevisionChanger | hasA = 1 | hasC = 1}}
 
{{RevisionChanger | hasA = 1 | hasC = 1}}
 
{{Infobox module
 
{{Infobox module
Line 8: Line 11:
 
}}
 
}}
  
==RS232 INTERFACE ADAPTER==
+
==RS232 INTERFACE ADAPTER== <!--T:2-->
  
 +
<!--T:3-->
 
This module is designed for interface adjustment between the devices
 
This module is designed for interface adjustment between the devices
 
which have the RS232 interface and the Smart Home system.
 
which have the RS232 interface and the Smart Home system.
  
 +
<!--T:4-->
 
<div class="caution">
 
<div class="caution">
 
CAUTION! All work related to the installation, connection, setting up, service and support must be carried out by qualified personnel with sufficient skills and experience in working with electrical equipment.
 
CAUTION! All work related to the installation, connection, setting up, service and support must be carried out by qualified personnel with sufficient skills and experience in working with electrical equipment.
Line 29: Line 34:
 
</div>
 
</div>
  
==Example of connection==
+
==Example of connection== <!--T:5-->
  
 +
<!--T:6-->
 
[[File:BWRS232C EXA.png|500px]]
 
[[File:BWRS232C EXA.png|500px]]
  
==Module parameters==
+
==Module parameters== <!--T:7-->
  
 +
<!--T:8-->
 
{{ Mp
 
{{ Mp
 
| rs232qty          = 1
 
| rs232qty          = 1
Line 48: Line 55:
 
}}
 
}}
  
==Module installation and connection procedure==
+
==Module installation and connection procedure== <!--T:9-->
  
 +
<!--T:10-->
 
#Connect the interface connector.
 
#Connect the interface connector.
 
#Connect the CAN connector.
 
#Connect the CAN connector.
Line 55: Line 63:
 
#Check all equipment for proper operation.
 
#Check all equipment for proper operation.
  
==Module shut-off and deinstallation procedure==
+
==Module shut-off and deinstallation procedure== <!--T:11-->
  
 +
<!--T:12-->
 
#Disconnect the CAN connector.
 
#Disconnect the CAN connector.
 
#Disconnect the interface connector.
 
#Disconnect the interface connector.
  
==HW settings==
+
==HW settings== <!--T:13-->
 
{|class="wikitable"
 
{|class="wikitable"
 
|-
 
|-
Line 85: Line 94:
 
</syntaxhighlight>
 
</syntaxhighlight>
 
|}
 
|}
 +
</translate>

Latest revision as of 14:09, 9 January 2022

Other languages:
English • ‎русский
Revision:
/B
/C


BW-RS232.C
BW-RS232C.png
Interface
Number of RS232 ports1
Other
Supply voltage11.5...27.5 V DC
Dimentions45x42x14 mm


RS232 INTERFACE ADAPTER

This module is designed for interface adjustment between the devices which have the RS232 interface and the Smart Home system.

CAUTION! All work related to the installation, connection, setting up, service and support must be carried out by qualified personnel with sufficient skills and experience in working with electrical equipment. To avoid the risk of fire, electric shock, damage to the system and/or personal injury, the system installation and assembly must be performed in accordance with the instructions listed below:

  • all connectivity work must be carried out with the power turned OFF;
  • use appropriate tools and personal protection against electric shock;
  • do not use damaged cables, wires and connectors;
  • avoid folding the cables and wires;
  • do not apply excessive force to the wires by kinking or pressing them too hard: the inner conductors of the cables and wires may get stripped or damaged;
  • do not use the power socket with poor contacts to connect;
  • do not exceed the load limit parameters specified in the manual;
  • the supply conductors wire section is subject to the specifications for current density limit, insulation type and wire material. Light section can result in cable overheating and fire.

When the power is on, NEVER:

  • connect/disconnect the connectors;
  • open modules and sensors.

Example of connection

BWRS232C EXA.png

Module parameters

Parameter name Value
Input channels qty
Input/output channels qty
0-10 input port quantity
Buttons
LED Buttons
Number of sensor inputs
Number of dry contact inputs
RS485 ports qty
RS232 ports qty 1
UART ports qty
M-BUS port quantity
Pulse inputs quantity
DALI ports qty
DALI-line voltage supply
Peak current of DALI-line power supply
Peak current in DALI-line
Maximum DALI devices quantity
Dimming channels qty
Output channels qty
0-10 output port quantity
Analog output channels qty
Output
Digital line maximum length
Discrete input channels qty
Digital input channels qty
Speakers
Max power output audio channel
Camera
IR lighting
Card reader
Connection type
Protocols
Backlight voltage
Load type
Dimmer load type
Supported sensors
Input voltage
Current type
Adjustment type
Max load
Min load
Max load per channel
Max load per group
Max load per device
Control parameters
Angle of vision IR °
Angle of motion °
Temperature measuring range °C
Humidity measuring range
Dimmer type
Dimming type
Voltage that may be applied to the input channels
Max output switching voltage
Max output switching current
Power supply 11.5 … 27.5 V DC from CAN
Max current(24V) 25 mA
Max current(13V)
Max detection distance
Max IR distance
Max BT distance
Max current
Relay
Data transfer speed
Permissible section of power supply cable to connect in socket:
Sensors VCC output
Sensors max VCC current
R1-R2 inputs max current
Push-button/reed switches line recommended length
Temperature sensor line max length
Sensor cable length
Sensors line max length
Bus type CAN (4-wire)
Compatible with
Output voltage
Output current
Equipment installation type Free
Mounting
Max cabel lenght
Case material ABS
Protection IP40
Temperature range -10 … +50 °C
Size 45x42x14 mm
Weight 15 g
* -
** -
*** -
1 -
2 -
3 -


Module installation and connection procedure

  1. Connect the interface connector.
  2. Connect the CAN connector.
  3. Configure the module using LT setup.
  4. Check all equipment for proper operation.

Module shut-off and deinstallation procedure

  1. Disconnect the CAN connector.
  2. Disconnect the interface connector.

HW settings

Name Type, range SUBID Default Description
cfg string 98 9600/8N1 cfg='SPEED/BPS', where
  • SPEED – baud rate [1200..115200];
  • B – data length [7,8];
  • P – presence and type of parity bit [N(No parity),E(Even parity),O(Odd parity)];
  • S – stop bit length [1, 1.5 or 2].

Example:

1hw="cfg='9600/8N1'"
echo on; off 98 'off' For settings check out and testing echo parameter can be used. Module

echo-reply can be turned on or off with the help of this parameter. Echo parameter value:

  • 'off';
  • 'on'.

Example:

1hw="cfg='9600/8N1' echo='off'"