editor, Interface administrators, Administrators, translation-admin, translator
9,706
edits
Changes
Climate control settings (view source)
Revision as of 11:55, 10 December 2021
, 11:55, 10 December 2021Created page with "1. Open LT Setup, in General tab click on Climate control<br> 200px<br> 2. Click on +Add button<br> 200px<br> 3. In the pop..."
1. Open LT Setup, in General tab click on Climate control<br>
[[File:Screenshot_2.png|200px]]<br>
2. Click on +Add button<br>
[[File:Screenshot_3.png|200px]]<br>
3. In the pop-up window, fill the fields below, Save changes
*Name - any you like
*Module - device, that will be controlling the climate
*Location - the room, in which your climate will be situated<br>
[[File:Screenshot_4.png|400px]]<br>
4. In the new window, you will set settings for the climate.<br>
In the Sensors panel, choose sensors from drop-down list for Temperature/Humidity/Warm floor/CO2.<br>
If you don`t have Humidity or CO2 sensors, for example, leave the fields empty.<br>
[[File:Screenshot_5.png|700px]]<br>
5. When you choose one, click on+, to add it !!<br>
[[File:Screenshot_6.png|700px]]<br>
6. After this, you will see the added sensor.<br>
If you won`t add a sensor like this, you can`t add devices (radiators, etc) to work with it.<br>
For Humidity/Warm floor/CO2 tabs procedure the same. You can use one sensor for some tabs.<br>
[[File:Screenshot_7.png|700px]]<br>
7. After the Sensors tab, move to Automation settings.<br>
There you can add devices to any Automation mode (Eco, Comfort, Hot) or create new ones.<br>
[[File:Screenshot 8.png|300px]]<br>
8. Click on +Add device, choose your object and Save settings.<br>
[[File:Screenshot 9.png|500px]]<br>
9. After Save, your device will appear below the tab Temperature. You can add as many devices as you have.<br>
[[File:Screenshot 10.png|600px]]<br>
[[File:Screenshot_2.png|200px]]<br>
2. Click on +Add button<br>
[[File:Screenshot_3.png|200px]]<br>
3. In the pop-up window, fill the fields below, Save changes
*Name - any you like
*Module - device, that will be controlling the climate
*Location - the room, in which your climate will be situated<br>
[[File:Screenshot_4.png|400px]]<br>
4. In the new window, you will set settings for the climate.<br>
In the Sensors panel, choose sensors from drop-down list for Temperature/Humidity/Warm floor/CO2.<br>
If you don`t have Humidity or CO2 sensors, for example, leave the fields empty.<br>
[[File:Screenshot_5.png|700px]]<br>
5. When you choose one, click on+, to add it !!<br>
[[File:Screenshot_6.png|700px]]<br>
6. After this, you will see the added sensor.<br>
If you won`t add a sensor like this, you can`t add devices (radiators, etc) to work with it.<br>
For Humidity/Warm floor/CO2 tabs procedure the same. You can use one sensor for some tabs.<br>
[[File:Screenshot_7.png|700px]]<br>
7. After the Sensors tab, move to Automation settings.<br>
There you can add devices to any Automation mode (Eco, Comfort, Hot) or create new ones.<br>
[[File:Screenshot 8.png|300px]]<br>
8. Click on +Add device, choose your object and Save settings.<br>
[[File:Screenshot 9.png|500px]]<br>
9. After Save, your device will appear below the tab Temperature. You can add as many devices as you have.<br>
[[File:Screenshot 10.png|600px]]<br>