Changes

{{revisionChanger | hasA = 1 | hasB = 1 | hasC = 1}}

{{revisionChanger | hasA = 1 | hasB = 1 | hasC = 1}}

{{Infobox module

{{Infobox module

| outCount  =  

| outCount  =  

| dimmOut    = 2

| dimmOut    = 2

| peakl      =  

| peakdlall  = 7.27A (1600W at 220V)

| peakdl    = 1.36A (300W at 220V)

| peakdl    = 4.54A (1000W at 220V)

| dt        = MOSFET

| dt        = MOSFET

| inDisc    =  

| inDisc    =  

}}

}}

==2-CHANNEL DIMMER==

==2-CHANNEL DIMMER== <!--T:2-->

This module is designed for smooth adjustment of brightness of lighting devices (non reactive load). The dimmer type is MOSFET with trailing edge dimming. Like all Larnitech devices, this dimmer controller is automatically detected and configured when it is added to the system. A logical unit within makes it possible for the unit to perform scripts from Larnitech’s large and constantly updated database and to operate on distributed logic, ensuring the reliability of its operation. Advanced LED light settings allow a more precise setup, while soft start mode prolongs lamp life. In addition to featuring protection in a range of parameters.

This module is designed for smooth adjustment of brightness of lighting devices (non reactive load). The dimmer type is MOSFET with trailing edge dimming. Like all Larnitech devices, this dimmer controller is automatically detected and configured when it is added to the system. A logical unit within makes it possible for the unit to perform scripts from Larnitech’s large and constantly updated database and to operate on distributed logic, ensuring the reliability of its operation. Advanced LED light settings allow a more precise setup, while soft start mode prolongs lamp life. In addition to featuring protection in a range of parameters.

==Features==

==Features== <!--T:4-->

*R/C load type has 2 channels. Each channel supports up to 300 W

*R/C load type has 2 channels. Each channel supports up to 1000 W

*Works with halogen /LED lights

*Works with halogen /LED lights

*Advanced LED light settings

*Advanced LED light settings

*Regular system updates

*Regular system updates

<div class="caution">

<div class="caution">

CAUTION! All work related to the installation, connection, setting up, service and support must be carried out by qualified personnel with sufficient skills and experience in working with electrical equipment.

CAUTION! All work related to the installation, connection, setting up, service and support must be carried out by qualified personnel with sufficient skills and experience in working with electrical equipment.

</div>

</div>

==Overview==

==Overview== <!--T:6-->

[[File:DM02C VIEW.png|500px]]

[[File:DM02C VIEW.png|500px]]

==Example of connection==

==Example of connection== <!--T:8-->

[[File:DM02C EXA.png|500px]]

[[File:DM02C EXA.png|500px]]

==Module dimensions==

==Module dimensions== <!--T:10-->

[[File:DM02C DIM.png|500px]]

[[File:DM02C DIM.png|500px]]

==Internal layout==

==Internal layout== <!--T:12-->

[[File:DM02C IL.png|500px]]

[[File:DM02C IL.png|500px]]

==Module parameters==

==Module parameters== <!--T:14-->

{{ Mp

{{ Mp

| dimqty          = 2

| dimqty          = 2

}}

}}

==Supported load types==

==Supported load types== <!--T:16-->

<div class="caution">CAUTION! Do not overload the dimmer in order to avoid it overheating and breaking down. Use it safely by following the parameters provided in the parameters table. Only the kinds of load and load power options outlined in the compatible devices table are to be used with this dimmer.</div>

<div class="caution">CAUTION! Do not overload the dimmer in order to avoid it overheating and breaking down. Use it safely by following the parameters provided in the parameters table. Only the kinds of load and load power options outlined in the compatible devices table are to be used with this dimmer.</div>

{{SupportedLoads | 0-1000}}

{{SupportedLoads | 0-1000}}

==Indication of module operation==

==Indication of module operation== <!--T:19-->

===Bootloader===

===Bootloader===

{{indication| textBBB= Waiting for bootloader command | textBB = Waiting for bootloader command}}

{{indication| textBBB= Waiting for bootloader command | textBB = Waiting for bootloader command}}

==Module installation and connection procedure==

==Module installation and connection procedure== <!--T:20-->

#Install the module in the switchboard on the DIN rail and fix it with the special latch on the module base.

#Install the module in the switchboard on the DIN rail and fix it with the special latch on the module base.

#Connect the CAN connector.

#Connect the CAN connector.

#Check all equipment for proper operation.

#Check all equipment for proper operation.

==Module shut-off and deinstallation procedure==

==Module shut-off and deinstallation procedure== <!--T:21-->

#Disconnect the power from the load.

#Disconnect the power from the load.

#Disconnect the contacts (1-2).

#Disconnect the contacts (1-2).

#Remove the module from the DIN rail, releasing the latch at the bottom of the module base.

#Remove the module from the DIN rail, releasing the latch at the bottom of the module base.

==Dimmer workflow==

==Dimmer workflow== <!--T:22-->

[[File:workflow.jpg|700px]]<br>

[[File:workflow.jpg|700px]]<br>

[[File:workflow2.jpg|700px]]<br>

[[File:workflow2.jpg|700px]]<br>

[[File:workflow3.jpg|700px]]

[[File:workflow3.jpg|700px]]

==Linear, LED and Halogen workflows==

==Linear, LED and Halogen workflows== <!--T:24-->

[[File:linear.jpg|700px]]<br>

[[File:linear.jpg|700px]]<br>

[[File:led.jpg|700px]]<br>

[[File:led.jpg|700px]]<br>

[[File:halogen.jpg|700px]]

[[File:halogen.jpg|700px]]

==HW settings==

==HW settings== <!--T:26-->

{|class="wikitable"

{|class="wikitable"

|-

|-

|}

|}

<syntaxhighlight lang="xml" line>

<syntaxhighlight lang="xml" line>

<item addr="307:1" auto-period="600" cfgid="77" hw="def=200 min=30 max=88 start=35 force=20 runtime=1000 " name="Dimmer" type="dimer-lamp" uniq_id="51"/>

<item addr="307:1" auto-period="600" cfgid="77" hw="def=200 min=30 max=88 start=35 force=20 runtime=1000 " name="Dimmer" type="dimer-lamp" uniq_id="51"/>

<item addr="307:98" cfgid="77" hw="dm='+-'" name="Temperature" system="yes" type="temperature-sensor" uniq_id="56"/>

<item addr="307:98" cfgid="77" hw="dm='+-'" name="Temperature" system="yes" type="temperature-sensor" uniq_id="56"/>

</syntaxhighlight>

</syntaxhighlight>