Difference between revisions of "DW-DM02"

From Larnitech wiki page
Jump to navigation Jump to search
 
(8 intermediate revisions by 2 users not shown)
Line 1: Line 1:
 +
<languages/>
 +
<translate>
 +
<!--T:1-->
 
{{revisionChanger | hasA = 1 | hasB = 1 | hasC = 1}}
 
{{revisionChanger | hasA = 1 | hasB = 1 | hasC = 1}}
 
{{Infobox module
 
{{Infobox module
Line 5: Line 8:
 
| outCount  =  
 
| outCount  =  
 
| dimmOut    = 2
 
| dimmOut    = 2
| peakl      =  
+
| peakdlall  = 7.27A (1600W at 220V)
| peakdl    = 1.36A (300W at 220V)
+
| peakdl    = 4.54A (1000W at 220V)
 
| dt        = MOSFET
 
| dt        = MOSFET
 
| inDisc    =  
 
| inDisc    =  
Line 14: Line 17:
 
}}
 
}}
  
==2-CHANNEL DIMMER==
+
==2-CHANNEL DIMMER== <!--T:2-->
  
 +
<!--T:3-->
 
This module is designed for smooth adjustment of brightness of lighting devices (non reactive load). The dimmer type is MOSFET with trailing edge dimming. Like all Larnitech devices, this dimmer controller is automatically detected and configured when it is added to the system. A logical unit within makes it possible for the unit to perform scripts from Larnitech’s large and constantly updated database and to operate on distributed logic, ensuring the reliability of its operation. Advanced LED light settings allow a more precise setup, while soft start mode prolongs lamp life. In addition to featuring protection in a range of parameters.
 
This module is designed for smooth adjustment of brightness of lighting devices (non reactive load). The dimmer type is MOSFET with trailing edge dimming. Like all Larnitech devices, this dimmer controller is automatically detected and configured when it is added to the system. A logical unit within makes it possible for the unit to perform scripts from Larnitech’s large and constantly updated database and to operate on distributed logic, ensuring the reliability of its operation. Advanced LED light settings allow a more precise setup, while soft start mode prolongs lamp life. In addition to featuring protection in a range of parameters.
  
==Features==
+
==Features== <!--T:4-->
*R/C load type has 2 channels. Each channel supports up to 300 W
+
*R/C load type has 2 channels. Each channel supports up to 1000 W
 
*Works with halogen /LED lights
 
*Works with halogen /LED lights
 
*Advanced LED light settings
 
*Advanced LED light settings
Line 27: Line 31:
 
*Short-circuit protection
 
*Short-circuit protection
 
*Plug and play (automatically detected and configured by the system)
 
*Plug and play (automatically detected and configured by the system)
*In-built logical unit
+
*Built-in logical unit
 
*Regular system updates
 
*Regular system updates
  
 +
<!--T:5-->
 
<div class="caution">
 
<div class="caution">
 
CAUTION! All work related to the installation, connection, setting up, service and support must be carried out by qualified personnel with sufficient skills and experience in working with electrical equipment.
 
CAUTION! All work related to the installation, connection, setting up, service and support must be carried out by qualified personnel with sufficient skills and experience in working with electrical equipment.
Line 46: Line 51:
 
</div>
 
</div>
  
==Overview==
+
==Overview== <!--T:6-->
  
 +
<!--T:7-->
 
[[File:DM02C VIEW.png|500px]]
 
[[File:DM02C VIEW.png|500px]]
  
==Example of connection==
+
==Example of connection== <!--T:8-->
  
 +
<!--T:9-->
 
[[File:DM02C EXA.png|500px]]
 
[[File:DM02C EXA.png|500px]]
  
==Module dimensions==
+
==Module dimensions== <!--T:10-->
  
 +
<!--T:11-->
 
[[File:DM02C DIM.png|500px]]
 
[[File:DM02C DIM.png|500px]]
  
==Internal layout==
+
==Internal layout== <!--T:12-->
  
 +
<!--T:13-->
 
[[File:DM02C IL.png|500px]]
 
[[File:DM02C IL.png|500px]]
  
==Module parameters==
+
==Module parameters== <!--T:14-->
  
 +
<!--T:15-->
 
{{ Mp
 
{{ Mp
 
| dimqty          = 2
 
| dimqty          = 2
 
| involtage      = 100-240V AC, 50-60 Hz
 
| involtage      = 100-240V AC, 50-60 Hz
 
| currtype        = AC
 
| currtype        = AC
| maxperch        = 1.56A (300W at 220V)
+
| maxperch        = 4.54A (1000W at 220V)
| maxperdev      = 2.72A (600W at 220V)
+
| maxperdev      = 7.27A (1600W at 220V)
 
| dimmertype      = MOSFET
 
| dimmertype      = MOSFET
 +
| dimmloadtype    = R,C
 
| dimmingtype    = trailing edge
 
| dimmingtype    = trailing edge
 
| power          = 11.5 … 27.5 V DC from CAN
 
| power          = 11.5 … 27.5 V DC from CAN
 
| maxcur24v      = 35 mA
 
| maxcur24v      = 35 mA
 
| bustype        = CAN (4-wire)
 
| bustype        = CAN (4-wire)
| instalation    = DIN-rail (EN 60715)
+
| instalation    = DIN rail (EN 60715)
 
| case            = ABS
 
| case            = ABS
 
| protection      = IP40
 
| protection      = IP40
Line 83: Line 94:
 
}}
 
}}
  
==Supported load types==
+
==Supported load types== <!--T:16-->
  
 +
<!--T:17-->
 
<div class="caution">CAUTION! Do not overload the dimmer in order to avoid it overheating and breaking down. Use it safely by following the parameters provided in the parameters table. Only the kinds of load and load power options outlined in the compatible devices table are to be used with this dimmer.</div>
 
<div class="caution">CAUTION! Do not overload the dimmer in order to avoid it overheating and breaking down. Use it safely by following the parameters provided in the parameters table. Only the kinds of load and load power options outlined in the compatible devices table are to be used with this dimmer.</div>
  
{{SupportedLoads | 0-300}}
+
<!--T:18-->
 +
{{SupportedLoads | 0-1000}}
  
==Indication of module operation==
+
==Indication of module operation== <!--T:19-->
 
===Bootloader===
 
===Bootloader===
 
{{indication| textBBB= Waiting for bootloader command | textBB = Waiting for bootloader command}}
 
{{indication| textBBB= Waiting for bootloader command | textBB = Waiting for bootloader command}}
Line 101: Line 114:
  
  
==Module installation and connection procedure==
+
==Module installation and connection procedure== <!--T:20-->
 
#Install the module in the switchboard on the DIN rail and fix it with the special latch on the module base.
 
#Install the module in the switchboard on the DIN rail and fix it with the special latch on the module base.
 
#Connect the CAN connector.
 
#Connect the CAN connector.
Line 109: Line 122:
 
#Check all equipment for proper operation.
 
#Check all equipment for proper operation.
  
==Module shut-off and deinstallation procedure==
+
==Module shut-off and deinstallation procedure== <!--T:21-->
 
#Disconnect the power from the load.
 
#Disconnect the power from the load.
 
#Disconnect the contacts (1-2).
 
#Disconnect the contacts (1-2).
Line 115: Line 128:
 
#Remove the module from the DIN rail, releasing the latch at the bottom of the module base.
 
#Remove the module from the DIN rail, releasing the latch at the bottom of the module base.
  
==Dimmer workflow==
+
==Dimmer workflow== <!--T:22-->
  
 +
<!--T:23-->
 
[[File:workflow.jpg|700px]]<br>
 
[[File:workflow.jpg|700px]]<br>
 
[[File:workflow2.jpg|700px]]<br>
 
[[File:workflow2.jpg|700px]]<br>
 
[[File:workflow3.jpg|700px]]
 
[[File:workflow3.jpg|700px]]
  
==Linear, LED and Halogen workflows==
+
==Linear, LED and Halogen workflows== <!--T:24-->
  
 +
<!--T:25-->
 
[[File:linear.jpg|700px]]<br>
 
[[File:linear.jpg|700px]]<br>
 
[[File:led.jpg|700px]]<br>
 
[[File:led.jpg|700px]]<br>
 
[[File:halogen.jpg|700px]]
 
[[File:halogen.jpg|700px]]
  
==HW settings==
+
==HW settings== <!--T:26-->
 
{|class="wikitable"
 
{|class="wikitable"
 
|-
 
|-
Line 157: Line 172:
 
|}
 
|}
  
 +
<!--T:27-->
 
<syntaxhighlight lang="xml" line>
 
<syntaxhighlight lang="xml" line>
 
<item addr="307:1" auto-period="600" cfgid="77" hw="def=200 min=30 max=88 start=35 force=20 runtime=1000 " name="Dimmer" type="dimer-lamp" uniq_id="51"/>
 
<item addr="307:1" auto-period="600" cfgid="77" hw="def=200 min=30 max=88 start=35 force=20 runtime=1000 " name="Dimmer" type="dimer-lamp" uniq_id="51"/>
Line 164: Line 180:
 
<item addr="307:98" cfgid="77" hw="dm='+-'" name="Temperature" system="yes" type="temperature-sensor" uniq_id="56"/>
 
<item addr="307:98" cfgid="77" hw="dm='+-'" name="Temperature" system="yes" type="temperature-sensor" uniq_id="56"/>
 
</syntaxhighlight>
 
</syntaxhighlight>
 +
</translate>

Latest revision as of 07:23, 30 May 2023

Other languages:
English • ‎русский
Revision:
/B
/C


DW-DM02.С
DM02C.png
Output ports
Number of dimming channels2
Max load per dimming channel4.54A (1000W at 220V)
Max load per device7.27A (1600W at 220V)
Dimmer typeMOSFET
Other
Supply voltage11.5...27.5 V DC from CAN
Dimentions4U, 69x100x58 mm


2-CHANNEL DIMMER

This module is designed for smooth adjustment of brightness of lighting devices (non reactive load). The dimmer type is MOSFET with trailing edge dimming. Like all Larnitech devices, this dimmer controller is automatically detected and configured when it is added to the system. A logical unit within makes it possible for the unit to perform scripts from Larnitech’s large and constantly updated database and to operate on distributed logic, ensuring the reliability of its operation. Advanced LED light settings allow a more precise setup, while soft start mode prolongs lamp life. In addition to featuring protection in a range of parameters.

Features

  • R/C load type has 2 channels. Each channel supports up to 1000 W
  • Works with halogen /LED lights
  • Advanced LED light settings
  • Soft start mode
  • Overload protection
  • Overheating protection
  • Short-circuit protection
  • Plug and play (automatically detected and configured by the system)
  • Built-in logical unit
  • Regular system updates

CAUTION! All work related to the installation, connection, setting up, service and support must be carried out by qualified personnel with sufficient skills and experience in working with electrical equipment. To avoid the risk of fire, electric shock, damage to the system and/or personal injury, the system installation and assembly must be performed in accordance with the instructions listed below:

  • all connectivity work must be carried out with the power turned OFF;
  • use appropriate tools and personal protection against electric shock;
  • do not use damaged cables, wires and connectors;
  • avoid folding the cables and wires;
  • do not apply excessive force to the wires by kinking or pressing them too hard: the inner conductors of the cables and wires may get stripped or damaged;
  • do not use the power socket with poor contacts to connect;
  • do not exceed the load limit parameters specified in the manual;
  • the supply conductors wire section is subject to the specifications for current density limit, insulation type and wire material. Light section can result in cable overheating and fire.

When the power is on, NEVER:

  • connect/disconnect the connectors;
  • open modules and sensors.

Overview

DM02C VIEW.png

Example of connection

DM02C EXA.png

Module dimensions

DM02C DIM.png

Internal layout

DM02C IL.png

Module parameters

Parameter name Value
Input channels qty
Input/output channels qty
0-10 input port quantity
Buttons
LED Buttons
Number of sensor inputs
Number of dry contact inputs
RS485 ports qty
RS232 ports qty
UART ports qty
M-BUS port quantity
Pulse inputs quantity
DALI ports qty
DALI-line voltage supply
Peak current of DALI-line power supply
Peak current in DALI-line
Maximum DALI devices quantity
Dimming channels qty 2
Output channels qty
0-10 output port quantity
Analog output channels qty
Output
Digital line maximum length
Discrete input channels qty
Digital input channels qty
Speakers
Max power output audio channel
Camera
IR lighting
Card reader
Connection type
Protocols
Backlight voltage
Load type
Dimmer load type R,C
Supported sensors
Input voltage 100-240V AC, 50-60 Hz
Current type AC
Adjustment type
Max load
Min load
Max load per channel 4.54A (1000W at 220V)
Max load per group
Max load per device 7.27A (1600W at 220V)
Control parameters
Angle of vision IR °
Angle of motion °
Temperature measuring range °C
Humidity measuring range
Dimmer type MOSFET
Dimming type trailing edge
Voltage that may be applied to the input channels 100-240V AC, 50-60 Hz
Max output switching voltage
Max output switching current
Power supply 11.5 … 27.5 V DC from CAN
Max current(24V) 35 mA
Max current(13V)
Max detection distance
Max IR distance
Max BT distance
Max current
Relay
Data transfer speed
Permissible section of power supply cable to connect in socket:
Sensors VCC output
Sensors max VCC current
R1-R2 inputs max current
Push-button/reed switches line recommended length
Temperature sensor line max length
Sensor cable length
Sensors line max length
Bus type CAN (4-wire)
Compatible with
Output voltage
Output current
Equipment installation type DIN rail (EN 60715)
Mounting
Max cabel lenght
Case material ABS
Protection IP40
Temperature range -10 … +50 °C
Size 4U, 69x102x58 mm
Weight 180g
* -
** -
*** -
1 -
2 -
3 -


Supported load types

CAUTION! Do not overload the dimmer in order to avoid it overheating and breaking down. Use it safely by following the parameters provided in the parameters table. Only the kinds of load and load power options outlined in the compatible devices table are to be used with this dimmer.
Supported load type Power
Load1.png Conventional incandescent lamps 0-1000W
Load2.png Halogen light sources 0-1000W
Load3.png LED lamps with dimming support 0-1000W
Load4.png Energy saving lamps with dimming support 0-1000W
Load5.png Electronic ballasts with dimming support 0-1000W

Indication of module operation

Bootloader

Indicator Status Description
Top.png
Yl.png Device in bootloader
Bot.png
B.pngB.png Waiting for bootloader command
R.pngR.png Flashing firmware

Firmware

Indicator Status Description
Top.png
G.pngG.pngG.pngDots.png Network configuration
B.pngB.pngB.pngDots.png Identification
Gl.png Operational mode
Yl.png Operational mode
Bot.png

Error
R.png Lost connection to server
R.pngR.png Overheat
R.pngR.pngR.png Overload
R.pngR.pngR.pngR.png No AC power
R.pngR.pngR.pngR.pngR.png RTC error
Bot.png

Activity
Y.png CAN activity
Bg.png OW activity
M.png RS-485 activity
B.png Ethernet activity


Module installation and connection procedure

  1. Install the module in the switchboard on the DIN rail and fix it with the special latch on the module base.
  2. Connect the CAN connector.
  3. Connect the contacts (1-2).
  4. Configure the module using LT setup.
  5. Apply power to the load.
  6. Check all equipment for proper operation.

Module shut-off and deinstallation procedure

  1. Disconnect the power from the load.
  2. Disconnect the contacts (1-2).
  3. Disconnect the CAN connector.
  4. Remove the module from the DIN rail, releasing the latch at the bottom of the module base.

Dimmer workflow

Workflow.jpg
Workflow2.jpg
Workflow3.jpg

Linear, LED and Halogen workflows

Linear.jpg
Led.jpg
Halogen.jpg

HW settings

Name Type, range SUBID Default Description
dm char[2] 98 'LL' Each char is responsible for the type of a particular channel
  • 'g' – use like halogen dimer-lamp
  • 's' – Soft Switch, lamp, when on/off power is supplied/deenergised smoothly (500msec)
  • 'k' – Switch, lamp, when on/off power is supplied/deenergised immediately
  • 'l' – LED Function, dimmable LED lamps
  • 'v' – linear Function of dimming
  • 'b' – blinds
  • 'f' – fancoil
  • '-' – Channel disabled
  • '+' – Regular channel

Example: dm='sk'

def integer 0-250 1-2 100 The default brightness level in case of a power reset (1..250). Example: def=250
min integer 0-100 1-2 0 Minimum dimming level, example: min=10
max integer 0-100 1-2 100 Maximum dimming level, example max=95
start integer 0-100 1-2 0 The Start function is used for lamps that lack the minimal voltage to get turned on. If the set value is lower than the start value, the lamp is turned on at the start value and them the light is dimmed down to the set level. Example: start=60
force integer 0-100 1-2 10 Time duration of the starting value (measured in milliseconds). Example: force=20
runtime integer 0-60000 1-2 1000 Runtime is the speed of changing the brightness from 'min' to 'max' (measured in milliseconds). Example: runtime=1000
1<item addr="307:1" auto-period="600" cfgid="77" hw="def=200 min=30 max=88 start=35 force=20 runtime=1000 " name="Dimmer" type="dimer-lamp" uniq_id="51"/>
2<item addr="307:2" auto-period="600" cfgid="77" hw="min=20 max=90 " name="Dimmer" type="dimer-lamp" uniq_id="52"/>
3<item addr="307:3" auto-period="600" cfgid="77"  name="Dimmer" type="dimer-lamp" uniq_id="53"/>
4<item addr="307:97" cfgid="77" name="Temperature" system="yes" type="temperature-sensor" uniq_id="55"/>
5<item addr="307:98" cfgid="77" hw="dm='+-'" name="Temperature" system="yes" type="temperature-sensor" uniq_id="56"/>