Changes

183 bytes added ,  13:23, 7 January 2022
Marked this version for translation
Line 1: Line 1:  
<languages/>
 
<languages/>
 
<translate>
 
<translate>
 +
<!--T:1-->
 
{{RevisionChanger | hasA = 1 | hasC = 1}}
 
{{RevisionChanger | hasA = 1 | hasC = 1}}
 
{{Infobox module
 
{{Infobox module
Line 11: Line 12:  
}}
 
}}
   −
==SERIAL INTERFACE ADAPTER==
+
==SERIAL INTERFACE ADAPTER== <!--T:2-->
    +
<!--T:3-->
 
This module is designed for interface adjustment between the devices which have the UART interface (TTL levels) and the Smart Home system.
 
This module is designed for interface adjustment between the devices which have the UART interface (TTL levels) and the Smart Home system.
    +
<!--T:4-->
 
<div class="caution">
 
<div class="caution">
 
CAUTION! All work related to the installation, connection, setting up, service and support must be carried out by qualified personnel with sufficient skills and experience in working with electrical equipment.
 
CAUTION! All work related to the installation, connection, setting up, service and support must be carried out by qualified personnel with sufficient skills and experience in working with electrical equipment.
Line 31: Line 34:  
</div>
 
</div>
   −
==Overview==
+
==Overview== <!--T:5-->
    +
<!--T:6-->
 
[[File:UARTC VIEW.png|300px]]
 
[[File:UARTC VIEW.png|300px]]
   −
==Module dimensions==
+
==Module dimensions== <!--T:7-->
    +
<!--T:8-->
 
[[File:UARTC DIM.png|500px]]
 
[[File:UARTC DIM.png|500px]]
   −
==Example of connection==
+
==Example of connection== <!--T:9-->
    +
<!--T:10-->
 
[[File:UARTC EXA.png|300px]]
 
[[File:UARTC EXA.png|300px]]
   −
==Module parameters==
+
==Module parameters== <!--T:11-->
    +
<!--T:12-->
 
{{ Mp
 
{{ Mp
 
| uartqty        = 1
 
| uartqty        = 1
Line 59: Line 66:  
}}
 
}}
   −
==Indication of module operation==
+
==Indication of module operation== <!--T:13-->
 
{{indicationold}}
 
{{indicationold}}
   −
==Module installation and connection procedure==
+
==Module installation and connection procedure== <!--T:14-->
 
#Install the module in the switchboard on the DIN rail and fix it with the special latch on the module base.
 
#Install the module in the switchboard on the DIN rail and fix it with the special latch on the module base.
 
#Connect the X1 connector.
 
#Connect the X1 connector.
Line 69: Line 76:  
#Check all equipment for proper operation.
 
#Check all equipment for proper operation.
   −
==Module shut-off and deinstallation procedure==
+
==Module shut-off and deinstallation procedure== <!--T:15-->
 
#Disconnect the CAN connector.
 
#Disconnect the CAN connector.
 
#Disconnect the X1 connector.
 
#Disconnect the X1 connector.
 
#Remove the module from the DIN rail, releasing the latch at the bottom of the module base.
 
#Remove the module from the DIN rail, releasing the latch at the bottom of the module base.
   −
==HW settings==
+
==HW settings== <!--T:16-->
 
{|class="wikitable"
 
{|class="wikitable"
 
|-
 
|-
editor, translation-admin, translator
4,754

edits