Line 1: |
Line 1: |
| + | <languages/> |
| + | <translate> |
| + | <!--T:1--> |
| {{RevisionChanger | hasA = 1 | hasB = 1}} | | {{RevisionChanger | hasA = 1 | hasB = 1}} |
| {{Infobox module | | {{Infobox module |
| | name = FW-WL.B | | | name = FW-WL.B |
− | | image = FW-WLB.jpg | + | | image = FW-WLB.png |
| | voltage = 9-12 V DC | | | voltage = 9-12 V DC |
− | | dim = 18x18x20 mm | + | | dim = 57x47x22 mm |
| }} | | }} |
| | | |
− | ==ON-THE-FLOOR LEAKAGE SENSOR== | + | ==ON-THE-FLOOR LEAKAGE SENSOR== <!--T:2--> |
| | | |
| + | <!--T:3--> |
| The sensor is placed on the floor surface. It has an alarm light, which | | The sensor is placed on the floor surface. It has an alarm light, which |
| changes from green to red if the sensor detects water on the floor. | | changes from green to red if the sensor detects water on the floor. |
| Used together with DW-WL02 or BW-LSA modules. | | Used together with DW-WL02 or BW-LSA modules. |
| | | |
− | ==Example of connection== | + | ==Features== <!--T:4--> |
| + | *Sensor presence detection |
| + | *Customizing the indication colors |
| + | *Adjusting the sensor sensitivity |
| + | *Connections of several sensors to one bus |
| | | |
| + | ==Example of connection== <!--T:5--> |
| + | |
| + | <!--T:6--> |
| [[File:FWWLB EXA.jpg|400px]] | | [[File:FWWLB EXA.jpg|400px]] |
| | | |
− | ==Connectors== | + | ==Connectors== <!--T:7--> |
| | | |
| + | <!--T:8--> |
| [[File:FWWLB CON.png|400px]] | | [[File:FWWLB CON.png|400px]] |
| | | |
− | ==Module parameters== | + | ==Module parameters== <!--T:9--> |
| | | |
| + | <!--T:10--> |
| {{ Mp | | {{ Mp |
| | power = 9-12 V DC | | | power = 9-12 V DC |
| | maxcur24v = 20 mA | | | maxcur24v = 20 mA |
− | | compatible = MF-10<br><br>DW-WL02/HTxx<br>BW-LSA | + | | compatible = Metaforsa devices<br>DW-WL02/HTxx<br>BW-LSA |
| | instalation = Free | | | instalation = Free |
| | case = ABS | | | case = ABS |
| | protection = IP64 | | | protection = IP64 |
| | temprange = -10 … +50 °C | | | temprange = -10 … +50 °C |
− | | size = 18x18x20 mm | + | | size = 57x47x22 mm |
− | | weight = 20g | + | | weight = 35g |
| }} | | }} |
| | | |
− | ==HW settings== | + | ==HW settings== <!--T:11--> |
| {|class="wikitable" | | {|class="wikitable" |
| |- | | |- |
Line 93: |
Line 106: |
| sens='180' | | sens='180' |
| </syntaxhighlight> | | </syntaxhighlight> |
| + | |- |
| + | |test||int(0,1)||sensors subId||1||0 - Disable the test signal to detect the presence of the sensor |
| |} | | |} |
| | | |
| + | <!--T:12--> |
| * Removing HW does not return the above parameters to their default values.To return to their default values, they must be set explicitly. | | * Removing HW does not return the above parameters to their default values.To return to their default values, they must be set explicitly. |
| ** Green and blue cannot be used at the same time. Green has priority. | | ** Green and blue cannot be used at the same time. Green has priority. |
| + | </translate> |