====Connection of motion sensors/leakage sensors====
====Connection of motion sensors/leakage sensors====
−
The motion sensors/leakage sensors should be connected to any free input in1-in28; in these conditions their power is connected to the contact points of +12V and GND of the relevant group. The example of connection is shown in '''Fig.11'''.
+
The motion sensors/leakage sensors should be connected to any free input in1-in28; in these conditions their power is connected to the contact points of +5V and GND of the relevant group. The example of connection is shown in '''Fig.11'''.
[[File:IOC_CONN_LM.png|400px]]
[[File:IOC_CONN_LM.png|400px]]
Line 601:
Line 601:
*'r' - thermo-resistor
*'r' - thermo-resistor
*'t' - DALLAS
*'t' - DALLAS
−
*'-' - none
*'-' - none
Example: io='KKKKKKKKKKKKKKKKKKKKKKKKKKKK'
Example: io='KKKKKKKKKKKKKKKKKKKKKKKKKKKK'
+
|-
+
|hw||string||98||-||hw="...", where
+
*pwm_invert – PWM inverting [1, 0];
+
*lbn_bright – brightness of led buttons, range (0 - 255);
+
*f – by default PWM frequency is 1000, range (1 - 5000).