editor, Interface administrators, Administrators, translation-admin, translator
9,706
edits
Changes
Created page with "*'e' - LED mygtukas atvirkštinis *'d' - LED mygtukas *'c' - mygtukas atvirkštinis *'b' - mygtukas *'s' - jungiklis *'k' – atvirkštinis kontaktas *'h' - susisiekite *'l' -..."
*'z' - WS2812B -styga
*'z' - WS2812B -styga
*'e' - led-button inverse
*'e' - LED mygtukas atvirkštinis
*'d' - led-button
*'d' - LED mygtukas
*'c' - button inverse
*'c' - mygtukas atvirkštinis
*'b' - button
*'b' - mygtukas
*'s' - switch
*'s' - jungiklis
*'k' - contact inverse
*'k' – atvirkštinis kontaktas
*'h' - contact
*'h' - susisiekite
*'l' - leak
*'l' - nutekėjimas
*'n' - Neptun
*'n' - Neptūnas
*'v' - motion inverse
*'v' – atvirkštinis judėjimas
*'m' - motion
*'m' - judesys
*'r' - thermo-resistor
*'r' - termorezistorius
*'t' - DALLAS
*'t' - DALAS
*'-' - none
*'-' - nė vienas
Pavyzdys: io='KKKKKKKKKKKKKKKKKKKKKKKKKKKK'
|-
|-
|hw||string||98||-||hw="...", where
|hw||string||98||-||hw="...", kur
*pwm_invert – PWM inverting [1, 0];
*pwm_invert – PWM invertavimas [1, 0];
*lbn_bright – brightness of led buttons, range (0 - 255);
*lbn_bright – LED mygtukų ryškumas, diapazonas (0 - 255);
*f – by default PWM frequency is 1000, range (1 - 5000).
*f – pagal numatytuosius nustatymus PWM dažnis yra 1000, diapazonas (1–5000).
Pavyzdys:
<syntaxhighlight lang="xml" line>
<syntaxhighlight lang="xml" line>
hw="io='4---zdd----t--' pwm_invert=1 lbn_bright=255 f=1000"
hw="io='4---zdd----t--' pwm_invert=1 lbn_bright=255 f=1000"
</syntaxhighlight>
</syntaxhighlight>
|-
|-
|colspan="3"|'''Only for Metaforsa 3.plus'''
|colspan="3"|'''Tik Metaforsa 3.plus'''
|-
|-
|cfg||string||98||9600/8N1||cfg='SPEED/BPS', where
|cfg||string||98||9600/8N1||cfg='SPEED/BPS', kur
*SPEED – baud rate [1200..115200];
*SPEED – perdavimo sparta [1200..115200];
*B – data length [7,8];
*B – duomenų ilgis [7,8];
*P – presence and type of parity bit [N(No parity),E(Even parity),O(Odd parity)];
*P – pariteto bito buvimas ir tipas [N(No parity),E(Even parity),O(Odd parity)];
*S – stop bit length [1, 1.5 or 2].
*S – stop bito ilgis [1, 1,5 arba 2].
Pavyzdys:
<syntaxhighlight lang="xml" line>
<syntaxhighlight lang="xml" line>
hw="cfg='9600/8N1'"
hw="cfg='9600/8N1'"
</syntaxhighlight>
</syntaxhighlight>
|-
|-
|[Protocol]||string||98||—||Protocol setting is described by protocol parameter. The following
|[Protocol]||string||98||—||Protokolo nustatymas aprašomas protokolo parametru. Sekantis
palaikomi protokolai:
*'modbus', Modbus protocol, at the end of redirection the checksum CRC16(Modbus) is added;
*'modbus', Modbus protokolas, peradresavimo pabaigoje pridedama kontrolinė suma CRC16(Modbus);
*'dmx', DMX protocol;
*'dmx', DMX protokolas;
*'CO2' for connecting Larnitech CO2 sensors;
*'CO2' skirtas Larnitech CO2 jutikliams prijungti;
*'salda' for connecting Salda ventilation.
*'salda' skirta Salda ventiliacijai prijungti.
Pavyzdys:
<syntaxhighlight lang="xml" line>
<syntaxhighlight lang="xml" line>
hw="cfg='9600/8N1' modbus"
hw="cfg='9600/8N1' modbus"
</syntaxhighlight>
</syntaxhighlight>
|-
|-
|echo||on; off||98||'off'||For settings check out and testing echo parameter can be used. Module
|echo||on; off||98||'off'||Nustatymams patikrinti ir testuoti galima naudoti aido parametrą. Modulis
echo-reply can be turned on or off with the help of this parameter.Echo parameter value:
echo-reply galima įjungti arba išjungti naudojant šį parametrą.Aido parametro reikšmė:
*'off'
*'išjungta'
*'on'
*"įjungta"
Pavyzdys:
<syntaxhighlight lang="xml" line>
<syntaxhighlight lang="xml" line>
hw="cfg='9600/8N1' echo='off'"
hw="cfg='9600/8N1' echo='off'"