Difference between revisions of "Modbus TCP"

From Larnitech wiki page
Jump to navigation Jump to search
Line 54: Line 54:
 
  DEBUG: Modbus thread unlocked for 192.168.1.110:502:0
 
  DEBUG: Modbus thread unlocked for 192.168.1.110:502:0
 
  DEBUG: Modbus client: send packet to 192.168.1.110:502:0 0x01050011FF00''' - Send ‘ON’ to first coil'''
 
  DEBUG: Modbus client: send packet to 192.168.1.110:502:0 0x01050011FF00''' - Send ‘ON’ to first coil'''
  DEBUG: Modbus client: confirmation from 192.168.1.110:502:0 0x01050011FF00 '''- Right feedback from device'''
+
  DEBUG: Modbus client: confirmation from 192.168.1.110:502:0 0x01050011FF00 '''- Right feedback from the device'''
 
  DEBUG: Modbus client: waiting for messages for 192.168.1.110:502:0
 
  DEBUG: Modbus client: waiting for messages for 192.168.1.110:502:0
 
  DEBUG: Add message 010500110000 to 192.168.1.110:502:0 queue
 
  DEBUG: Add message 010500110000 to 192.168.1.110:502:0 queue
 
  DEBUG: Modbus thread unlocked for 192.168.1.110:502:0
 
  DEBUG: Modbus thread unlocked for 192.168.1.110:502:0
 
  DEBUG: Modbus client: send packet to 192.168.1.110:502:0 0x010500110000''' - Send ‘OFF’ to first coil'''
 
  DEBUG: Modbus client: send packet to 192.168.1.110:502:0 0x010500110000''' - Send ‘OFF’ to first coil'''
  DEBUG: Modbus client: confirmation from 192.168.1.110:502:0 0x010500110000''' - Right feedback from device'''
+
  DEBUG: Modbus client: confirmation from 192.168.1.110:502:0 0x010500110000''' - Right feedback from the device'''
 
  DEBUG: Modbus client: waiting for messages for 192.168.1.110:502:0
 
  DEBUG: Modbus client: waiting for messages for 192.168.1.110:502:0

Revision as of 14:24, 18 November 2021

ModBus TCP Plugin installation & configuration

  1. Make sure you have ModBus TCP licenses
    Newmodbus1.png
  2. Make sure you have the latest versions of LT Setup, LT Server, ModBus TCP plugin installed
    Newmodbus2.png
  3. Configure plugin before enabling.
    Newmodbus3.png

    Newmodbus4.png

    Newmodbus5.png
    IP - IP address of a ModBus TCP device, make sure that you can ping this device Port - 502 it is default port in most cases, but check documentation of your ModBus TCP device Master/Slave - this option means that you add a Master device or Slave device
  4. Enable plugin.
    Newmodbus6.png


Examples

  1. Go to Scripts page and create Blockly script
    Newmodbus7.png
  2. Add ModBus block from Other tab
    Newmodbus8.png
  3. Choose ModBus TCP com-port from dropdown list and fill other fields. Save script and try it.
    Newmodbus9.png

Logs

Starting Service of MODBUS TCP plugin for Larnitech system...
Started Service of MODBUS TCP plugin for Larnitech system.
Compiled: Jul  7 2021 13:59:57
INF: Settings:
INF: debug yes - Debug mode is enabled
INF: modbus-devices 192.168.1.110:502:0
INF: Modbus 192.168.1.110:502:0 thread created
INF: Modbus 192.168.1.110:502:0 thread started
DEBUG: Modbus client: connected to 192.168.1.110:502:0 - Plugin connected to the device
DEBUG: Modbus client: waiting for messages for 192.168.1.110:502:0
DEBUG: Add message 01050011FF00 to 192.168.1.110:502:0 queue
DEBUG: Modbus thread unlocked for 192.168.1.110:502:0
DEBUG: Modbus client: send packet to 192.168.1.110:502:0 0x01050011FF00 - Send ‘ON’ to first coil
DEBUG: Modbus client: confirmation from 192.168.1.110:502:0 0x01050011FF00 - Right feedback from the device
DEBUG: Modbus client: waiting for messages for 192.168.1.110:502:0
DEBUG: Add message 010500110000 to 192.168.1.110:502:0 queue
DEBUG: Modbus thread unlocked for 192.168.1.110:502:0
DEBUG: Modbus client: send packet to 192.168.1.110:502:0 0x010500110000 - Send ‘OFF’ to first coil
DEBUG: Modbus client: confirmation from 192.168.1.110:502:0 0x010500110000 - Right feedback from the device
DEBUG: Modbus client: waiting for messages for 192.168.1.110:502:0