Changes

253 bytes added , 14:57, 3 November 2023

m

no edit summary

Line 17: Line 17:

The box features the following:

+

① - A power unit with Type-C USB port, supporting the Power Delivery technology;

+

② - A power bank with a display and Type-C output port, which can be used to power up the demonstration suitcase;

+

③ - Type-C cable with a power consumption indicator;

+

④ - 2 CAN bus cables;

+

⑤ - Demonstration board featuring a BW-LC02 module with 2 LED lights, 4 buttons with backlight and a temperature sensor connected to it.

[[File:DemoCase2.png|1000x800px]]

<hr>

−

~~~~

The demonstration suitcase contains the following elements:

‘Metaforsa 2’ module.

+

‘Metaforsa 2’ has:

+

① - 10 relay channels with LED lights connected to them, indicating their current status;

+

② - 4 dimmable channels, with dimmable LED lights connected to them;

−

③ - 24 input channels, with 6 buttons ④ and 4 switches ⑤ connected to them in order to imitate various sensors.

+

+

③ - 24 input channels, with 6 buttons ④ and 4 switches ⑤ connected to them in order to imitate various sensors;

−

⑥ - Input channels for temperature sensors with one sensor connected to it.

+

+

⑥ - Input channels for temperature sensors with one sensor connected to it;

−

⑦ - CAN bus for connecting extra devices. Other modules of the demonstration case are connected to it, as well as 2 ports ⑧ for connecting external devices;

+

+

⑦ - CAN bus for connecting extra devices. Other modules of the demonstration case are connected to it, as well as 2 ports ⑧ for connecting external devices.

[[File:DemoCase3.png|1000x800px]]

<hr>

−

~~~~

DW-IO module

+

This module has 14 universal input/output channels, with the following items connected to them:

+

① - 4-channel RGBW strip, connected via the AMP5V-4 ② current amplifier;

−

③ - A strip with addressed LED lights. Each of these LED lights can shine with its own individual color.

+

+

③ - A strip with addressed LED lights. Each of these LED lights can shine with its own individual color;

+

④ - Temperature sensor;

+

⑤ - And two buttons with backlight.

[[File:DemoCase4.png|1000x800px]]

<hr>

−

~~~~

The demonstration case also features the following:

+

① - a Media Point FE-MP with ② two speakers;

+

③ - A six-in-one CW-CO2 sensor, which measures:

−

Level of motion, Lighting, Temperature, Humidity, Level of CO2 and which has an infrared transmitter.

+

Level of motion, Lighting, Temperature, Humidity, Level of CO2 and which has an infrared transmitter;

+

④ - a 4-inch sensor panel LCP4 which can display either a regular interface or an interface adapted for wall panels;

−

Inside the case there is a button control module BW-SW24 which has a six-button 24-volt JUNG keypad ⑤ connected to it.

+

−

And a Wi-Fi router, which can get connected to the internet either via an ethernet port ⑥ on the front panel of the case or via an available Wi-Fi network.

+

Inside the case there is a button control module BW-SW24 which has a six-button 24-volt JUNG keypad ⑤ connected to it;

−

For power supply, there is a Type-C port ⑦, which is located on the front panel

+

And a Wi-Fi router, which can get connected to the internet either via an ethernet port ⑥ on the front panel of the case or via an available Wi-Fi network;

+

For power supply, there is a Type-C port ⑦, which is located on the front panel.

All the equipment installed in the demonstration suitcase is powered by 20 Volts, which is absolutely safe for the user.

Connect the power cable and the Ethernet cable. If you do not have the possibility to connect via Ethernet, later in this video we will demonstrate how to connect the inbuilt router to your Wi-Fi network.

[[File:DemoCase5.png|1000x800px]]

<hr>

−

~~~~

In order to proceed, the Larnitech app needs to be installed onto your smartphone or tablet. Just scan the first QR code from the top of your suitcase.

+

If after installing and starting the application the connection does not get established automatically, you will need to connect to Wi-Fi network ‘Larnitech_case_5G’ with the help of your mobile device. Then start the application and scan the first QR code in the ‘Connections’ section

You may need to turn off data transmission on your mobile device if the demonstration set is not connected to the Internet.

Line 103: Line 120:

−

Now we can set up these executors. In order to do this, enter the additional menu ① and activate the edit mode, by pressing the appropriate icon .

+

Now we can set up these executors. In order to do this, enter the additional menu ① and activate the edit mode, by pressing the appropriate icon.

Now we are in the edit mode ②, which can be seen from the appropriate notification in the top part of the screen. In this mode, when we press and hold an icon, we can move it among other elements and place it into another Room by placing it in the Area-choosing Menu and then choosing the area that we need. A long press ③ of the element starts the menu, from which we set up the current element.In the ‘General’ ④ section we can change the name of the element, add a voice command for it, change an icon or add the element to ‘Favorites’.

[[File:DemoCase10.png|1000x800px]]

Line 111: Line 128:

‘Auto’ section ① lets us activate the automation with a few clicks, as well as set up its parameters.

+

In the ‘schedule’ section ②, you can determine the schedule when the given element will turn on or off, including by using the time of the setting and rising of the sun.

+

The ‘Switches’ tab ③ lets you bind a button to control the executor.

[[File:DemoCase11.png|1000x800px]]

Line 126: Line 145:

Let’s also set up basic automation of turning an executor on or off with the help of a motion sensor.

+

The ‘Auto period’ ① option sets the time for which the automation is disabled after an executor is manually controlled.For our demonstration purposes, we will set it to zero.

+

Then we will activate the automation ② to turn on the executor when motion is detected. We choose the motion sensor ③ and the level of motion ④. We can also choose a light sensor and its parameters.

[[File:DemoCase13.png|1000x800px]]

Line 151: Line 172:

While you are in the Edit Mode, there is a ‘Setup’ ① icon in the additional menu.

−

Here in the ‘Structure’② tab we can see all the areas.

+

Here in the ‘Structure’ ② tab we can see all the areas.

−

We can create new ones &#~~9315~~;, rename them and move the elements around.

+

We can create new ones ③, rename them and move the elements around.

[[File:DemoCase17.png|1000x800px]]

<hr>

Line 171: Line 192:

[[File:DemoCase20.jpg|800x600px]]

+

<hr>

−

~~~~

We thank you for watching this tutorial! If you have questions or need extra help, please do not hesitate to refer to our technical support team. See you in the next episodes!

</translate>

Support

editor, Interface administrators, Administrators, translation-admin, translator

9,706

edits

Changes

Quick Start Guide (view source)

Revision as of 14:57, 3 November 2023

Navigation menu

Search