Line 16: |
Line 16: |
| |- | | |- |
| |- | | |- |
− | !Name!!type and variety!!description!!default value | + | !Название!!Тип и диапазон!!Описание!!Значение по умолчанию |
| |- | | |- |
− | |id||number 2048||ID of the device where this element is located physically (always use 2048)||2048 | + | |id||номер 2048||Идентификатор устройства, на котором физически расположен этот элемент (всегда используйте 2048)||2048 |
| |- | | |- |
− | |sub-type||enum||displayed remote control module (it should be specified in the interface)||- | + | |sub-type||перечисление||Отображаемый модуль дистанционного управления (должен быть указан в интерфейсе)||- |
| |- | | |- |
− | |identifier||enum||remote control button identifier||- | + | |identifier||перечисление||Идентификатор кнопки пульта дистанционного управления||- |
| |- | | |- |
− | |transmitter-addr||ADDR||IR signals transmitter address or address of another executor (script, interface etc.)||- | + | |transmitter-addr||ADDR||Адрес передатчика ИК-сигналов или адрес другого исполнительного устройства (скрипт, интерфейс и т.п.)||- |
| |- | | |- |
− | |value||HEX||Data sent by IR transmitter when activating the button||- | + | |value||HEX||Данные, отправляемые ИК-передатчиком при нажатии кнопки||- |
| |- | | |- |
− | |string-value||String||Data sent to ADDR when activating the button||- | + | |string-value||строка||Данные, отправленные в ADDR при активации кнопки||- |
| |} | | |} |
| | | |
− | ===In order to add the device IR-console to "Larnitech" application it is required=== | + | ===Для добавления ИК-пульта устройства в приложение Larnitech необходимо=== |
| | | |
− | #Add to logic.xml file the device of remote-control type using LT Setup (Add remote control) or choose "Edit mode" in mobile app and press "Create remote" button from main menu. | + | #Добавить в файл logic.xml устройство дистанционно-управляемого типа с помощью LT Setup (Добавить пульт ДУ) (Add remote control) или выбрать Редактирование режима (Edit mode) в мобильном приложении и нажать кнопку Создать пульт ДУ (Create remote) в главном меню. |
− | #Activate the engineering mode in " Larnitech " app settings. | + | #Активировать инженерный режим в настройках приложения Larnitech. |
− | #In the device list find the remote control added from LT Setup and choose "Edit mode". | + | #В списке устройств найти пульт дистанционного управления, добавленный из LT Setup, и выбрать Режим редактирования (Edit mode). |
− | #In the window that appears select the IR-transmitter from which the IR-signals will be sent to the device (TV, DVD, Receiver). | + | #В появившемся окне выбрать ИК-передатчик, с которого ИК-сигналы будут отправляться на устройство (ТВ, DVD, Ресивер). |
− | #In the window that appears select the IR-receiver (gateway) for reading the IR-signals from the device remote control (TV, DVD, Receiver). | + | #В появившемся окне выбрать ИК-приемник (шлюз) для считывания ИК-сигналов с пульта ДУ устройства (ТВ, DVD, Ресивер). |
− | #Press the remote control button in "Larnitech" application, the countdown will start during which you are to send the IR-signal to the IR-receiver (gateway). The gateway will capture the signal and the button in "Larnitech" application will be activated. | + | #Нажать кнопку пульта в приложении Larnitech, начнется обратный отсчет, во время которого вы должны отправить ИК-сигнал на ИК-приемник (шлюз). Шлюз зафиксирует сигнал и кнопка в приложении Larnitech будет активирована. |
− | #Set each the button of the device remote control as it is shown in paragraph No.6. | + | #Настроить каждую кнопку пульта ДУ устройства, как показано в пункте №6. |