Changes

Created page with "{{ infobox | above = <includeonly>{{{name|{{PAGENAMEBASE}}}}}</includeonly> | bodystyle = width:30em; | autoheaders = y | image = {{#invoke:InfoboxImage|InfoboxI..."
{{ infobox
| above = <includeonly>{{{name|{{PAGENAMEBASE}}}}}</includeonly>
| bodystyle = width:30em;
| autoheaders = y
| image = {{#invoke:InfoboxImage|InfoboxImage|image={{{image|}}}|size={{{image_size|{{{imagesize|}}}}}}|maxsize={{{image_maxsize|}}}|sizedefault={{{image_sizedefault|frameless}}}|upright={{{image_upright|1}}}|alt={{{alt|}}}|title={{{image_title|}}}|link={{{image_link|}}}}}
| image2 = {{#invoke:InfoboxImage|InfoboxImage|image={{{image2|}}}|size={{{image_size2|{{{imagesize2|}}}}}}|maxsize={{{image_maxsize2|}}}|sizedefault={{{image_sizedefault2|frameless}}}|upright={{{image_upright2|1}}}|alt={{{alt|}}}|title={{{image_title2|}}}|link={{{image_link2|}}}}}
| labelstyle = display:none;
| data1 = {{ infobox | subbox = yes
| autoheaders = y
| labelstyle = width:60%;
| headerstyle = background:#00bb00;
| header1 = '''Output ports'''
| label2 = Number of switched channels
| data2 = {{{outCount|}}}
| label3 = Number of dimming channels
| data3 = {{{dimmOut|}}}
| label4 = 0-10 output port quantity
| data4 = {{{010out|}}}
| label5 = 0-10 port quantity
| data5 = {{{010|}}}
| label6 = Peak load
| data6 = {{{peakl|}}}
| label7 = Max load per dimming channel
| data7 = {{{peakdl|}}}
| label8 = Dimmer type
| data8 = {{{dt|}}}
}}
| data2 = {{ infobox | subbox = yes
| autoheaders = y
| labelstyle = width:60%;
| headerstyle = background:#8888bb;
| header1 = '''Input ports'''
| label2 = Number of discrete inputs
| data2 = {{{inDisc|}}}
| label3 = Number of digital inputs
| data3 = {{{inDigit|}}}
| label4 = Number of sensor inputs
| data4 = {{{inSens|}}}
| label5 = Number of dry contact inputs
| data5 = {{{inDry|}}}
| label6 = Number of inputs
| data6 = {{{inCount|}}}
| label7 = 0-10 input port quantity
| data7 = {{{010in|}}}
| label8 = Number of buttons
| data8 = {{{inB|}}}
| label9 = Number of LED buttons
| data9 = {{{inLB|}}}
| label10 = Number of pulse inputs
| data10 = {{{pInCount|}}}
}}
| data3 = {{ infobox | subbox = yes
| autoheaders = y
| labelstyle = width:60%;
| headerstyle = background:#bbbb00;
| header1 = '''Interface'''
| label2 = Number of RS485 ports
| data2 = {{{RS485|}}}
| label3 = Number of RS232 ports
| data3 = {{{RS232|}}}
| label4 = Number of UART ports
| data4 = {{{UART|}}}
| label5 = Number of DALI ports
| data5 = {{{DALI|}}}
| label6 = Number of M-BUS ports
| data6 = {{{MBUS|}}}
| label7 = Data transfer speed
| data7 = {{{dts|}}}
}}
| data4 = {{ infobox | subbox = yes
| autoheaders = y
| labelstyle = width:60%;
| headerstyle = background:#00bb00;
| header1 = '''Sensors'''
| label2 = Control parameters
| data2 = {{{cp|}}}
| label3 = Angle of vision IR
| data3 = {{{ir|}}}
| label4 = Angle of motion
| data4 = {{{motion|}}}
| label5 = Temperature measuring range
| data5 = {{{temperature|}}}
| label6 = Humidity measuring range
| data6 = {{{humidity|}}}
}}
| data5 = {{ infobox | subbox = yes
| autoheaders = y
| labelstyle = width:60%;
| headerstyle = background:#8888bb;
| header1 = '''General'''
| label2 = Type of connection
| data2 = {{{toc|}}}
| label3 = Input/output interfaces
| data3 = {{{iointerfaces|}}}
| label4 = Max CAN devices
| data4 = {{{maxcandev|}}}
| label5 = CAN port qty
| data5 = {{{canportqty|}}}
| label6 = Max CAN bus length
| data6 = {{{canbuslength|}}}
| label7 = Max current per CAN bus
| data7 = {{{maxcancurrent|}}}
}}
| data6 = {{ infobox | subbox = yes
| autoheaders = y
| labelstyle = width:60%;
| headerstyle = background:#dededf;
| header1 = '''Other'''
| label2 = Supply voltage
| data2 = {{{voltage|}}}
| label3 = Dimentions
| data3 = {{{dim|}}}
}}
}}

<noinclude>
<pre style="overflow:auto">
{{Infobox module
| name = Module name
| image = Module image
| outCount = Number of switched channels
| dimmOut = Number of dimming channels
| peakl = Peak load (one-device)
| peakdl = Max load per dimming channel
| dt = Dimmer type
| inDisc = Number of discrete inputs
| inDigit = Number of digital inputs
| inSens = Number of sensor inputs
| inDry = Number of dry contact inputs
| inCount = Number of inputs
| inB = Number of buttons
| inLB = Number of LED buttons
| RS485 = Number of RS485 ports
| RS232 = Number of RS232 ports
| UART = Number of UART ports
| DALI = Number of DALI ports
| dts = Data transfer speed
| toc = Type of connection
| iointerfaces = Input/output interfaces
| maxcandev = Max CAN devices
| canportqty = CAN port qty
| canbuslength = Max CAN bus length
| maxcancurrent = Max current per CAN bus
| voltage = Supply voltage
| dim = Module dimentions
| cp = Control parameters
| ir = Angle of vision IR
| motion = Angle of motion
| temperature = Temperature measuring range
| humidity = Humidity measuring range
}}


Template for using
{{Infobox module
| name =
| image =
| outCount =
| dimmOut =
| peakl =
| peakdl =
| dt =
| inDisc =
| inDigit =
| inSens =
| inDry =
| inCount =
| inB =
| inLB =
| RS485 =
| RS232 =
| UART =
| DALI =
| dts =
| toc =
| iointerfaces =
| maxcandev =
| canportqty =
| canbuslength =
| maxcancurrent =
| voltage =
| dim =
| cp =
| ir =
| motion =
| temperature =
| humidity =
}}
</pre>
</noinclude>