Larnitech wiki page

Translations:DW-HT07.A/38/en

Revision as of 11:08, 3 February 2022 by FuzzyBot (talk | contribs) (Importing a new version from external source)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
  1. Connect the outputs.
  2. Connect the inputs.
  3. Connect the Can connector.
  4. Configure the module using LT setup.
  5. Apply power to the load
  6. Check all equipment for proper operation.
Retrieved from "https://wiki.larnitech.com/index.php?title=Translations:DW-HT07.A/38/en&oldid=10406"