Example of description in XML:
<item addr="100:10" name="chandelier" type="rgb-lamp" auto-period="600" system="yes"> <linked addr="101:16"/> // is bound to the button with the address 101:1 <automation ……/> // set the automation for this element </item>
<item addr="100:10" name="chandelier" type="rgb-lamp" auto-period="600" color-temp="307:4" color-white="307:5"> <linked addr="101:1"/> // is bound to the button with the address 101:1 <automation ……/> // set the automation for this element </item>
color-temp=”dimmer ID:SUBID” – for adding and control dimmer brigtness bar with temperature.
color-white=”dimmer ID:SUBID” – for adding and control dimmer brigtness bar “white”.
Device status (4 bytes):
Byte number | description |
---|---|
0 | Device status. Bit 0: 0 – off 1 – on Bit 3: 0 – automation is disactivated 1 – automation is activated Bit 7: 0 – no alarm 1 – alarm (relating to temperature) |
1 | V – brightness https://en.wikipedia.org/wiki/HSL_and_HSV 0..250 |
2 | S – contrast https://en.wikipedia.org/wiki/HSL_and_HSV 0..250 |
3 | Н – colour hue https://en.wikipedia.org/wiki/HSL_and_HSV 0..250 |
Possible variants of setting the status
1. single-byte
byte | description |
---|---|
0 | Status (on/off) 0 – off 1 – on 0xFF – Change the status for the opposite one |
2. 4-bytes
byte | description |
---|---|
0 | Status (on/off) 0 – off 1 – on 0xFE – do not change the status of this byte 0xFF – Change the status for the opposite one |
1 | Brightness 0 – off 1..250 – brightness 0xFE – do not change the status of this byte |
2 | contrast 0 – off 1..250 – brightness 0xFE – do not change the status of this byte |
3 | colour hue |
3. 5-bytes
byte | description |
---|---|
0 | Status (on/off) 0 – off 1 – on 0xFE – do not change the status of this byte 0xFF – Change the status for the opposite one |
1 | Brightness 0 – off 1..250 – brightness 0xFE – do not change the status of this byte |
2 | Сontrast 0 – off 1..250 – сontrast 0xFE – do not change the status of this byte |
3 | Сolour hue 0 – off 1..250 – сolour hue 0xFE – do not change the status of this byte |
4 | Time required for changing the status, x0.1 seconds (runtime=100, apply as 10 seconds) |