| CW-MLI-II.C |
|---|
 |
|
| Control parameters | lighting, motion |
|---|
| Angle of vision IR | 360° |
|---|
|
|
| Supply voltage | 11.5...27.5 V DC |
|---|
| Dimentions | 51x51x37 mm |
|---|
|
3 IN 1 SENSOR
This module contains motion sensor, lighting sensor, and an IR transmitter.
Module view
Motion detection area
Module dimentions
Module parameters
| Parameter name |
Value
|
| Input channels qty |
|
| Input/output channels qty |
|
| 0-10 input port quantity |
|
| Buttons |
|
| LED Buttons |
|
| Number of sensor inputs |
|
| Number of dry contact inputs |
|
| RS485 ports qty |
|
| RS232 ports qty |
|
| UART ports qty |
|
| M-BUS port quantity |
|
| Pulse inputs quantity |
|
| DALI ports qty |
|
| DALI-line voltage supply |
|
| Peak current of DALI-line power supply |
|
| Peak current in DALI-line |
|
| Maximum DALI devices quantity |
|
| Dimming channels qty |
|
| Output channels qty |
|
| 0-10 output port quantity |
|
| Analog output channels qty |
|
| Output |
|
| Digital line maximum length |
|
| Discrete input channels qty |
|
| Digital input channels qty |
|
| Speakers |
|
| Max power output audio channel |
|
| Camera |
|
| IR lighting |
|
| Card reader |
|
| Connection type |
|
| Protocols |
|
| Backlight voltage |
|
| Load type |
|
| Dimmer load type |
|
| Supported sensors |
|
| Input voltage |
|
| Current type |
|
| Adjustment type |
|
| Max load |
|
| Min load |
|
| Max load per channel |
|
| Max load per group |
|
| Max load per device |
|
| Control parameters |
Motion, lightning
|
| Angle of vision IR |
360°
|
| Angle of motion |
°
|
| Temperature measuring range |
°C
|
| Humidity measuring range |
|
| Dimmer type |
|
| Dimming type |
|
| Voltage that may be applied to the input channels |
|
| Max output switching voltage |
|
| Max output switching current |
|
| Power supply |
11.5 … 27.5 V DC from CAN
|
| Max current(24V) |
50 mA
|
| Max current(13V) |
|
| Max detection distance |
|
| Max IR distance |
3 meters*
|
| Max BT distance |
|
| Max current |
|
| Relay |
|
| Data transfer speed |
|
| Permissible section of power supply cable to connect in socket: |
|
| Sensors VCC output |
|
| Sensors max VCC current |
|
| R1-R2 inputs max current |
|
| Push-button/reed switches line recommended length |
|
| Temperature sensor line max length |
|
| Sensor cable length |
|
| Sensors line max length |
|
| Bus type |
CAN (4-wire)
|
| Compatible with |
|
| Output voltage |
|
| Output current |
|
| Equipment installation type |
Cell.
|
| Mounting |
|
| Max cabel lenght |
|
| Case material |
ABS
|
| Protection |
IP40
|
| Temperature range |
-10 … +50 °C
|
| Size |
51x51x37 mm
|
| Weight |
25g
|
* - depends on many factors, such as the sensitivity of the IR receiver, the reflectivity of surfaces etc. Recommended distance up to 3 meters
** -
*** -
1 -
2 -
3 -
HW settings
| Name |
Type, range |
SUBID |
Default |
Description
|
| scale |
float (0…8) |
SubID of sensor |
1 |
multiplier determines the slope of values (except temperature sensors) Example:
|
| pwr |
integer (1…100) |
SubID of IR-transmitter |
100 |
Power of infrared transmitter signal. Example:
|
1<item addr="410:11" cfgid="78" name="IR transmitter" type="ir-transmitter"/>
2<item addr="410:30" cfgid="78" name="Motion" hw="scale='3.2'" type="motion-sensor" uniq_id="820"/>
3<item addr="410:31" cfgid="78" name="Illumination" hw="scale='4.8'" type="illumination-sensor" uniq_id="821"/>
4<item addr="410:98" cfgid="78" name="Temperature" system="yes" type="temperature-sensor" uniq_id="822"/>