Changes

Quick Start Guide (view source)

Revision as of 12:37, 31 October 2023

20 bytes added , 12:37, 31 October 2023

no edit summary

Line 3: Line 3:

<youtube width="900px" height="500px">DIMELmedOHw</youtube>

−

~~</translate>~~

<hr>

+

'''Quick start/unboxing.'''

+

<hr>

Line 12: Line 13:

[[File:DemoCase01.png|1000x800px]]

<hr>

−

+

The box features the following:

Line 81: Line 83:

[[File:DemoCase6.png|1000x800px]]

<hr>

+

The main screen of the app has several key elements. In the upper left corner there is the ‘area select’ menu ①.

Line 87: Line 90:

[[File:DemoCase7.png|1000x800px]]

<hr>

−

+

Turning the executors ① on or off is done with a simple click. In order to change the level of lighting ②, color of lights or the position of the blinds, use a double click. In order to access the status history ③ of this executor or sensor, press and hold the icon for one second.

A short press of the physical buttons on the panel turns the light on or off. Press and hold the button to change the light brightness.

[[File:DemoCase08.png|1000x800px]]

<hr>

−

+

In order to demonstrate the Plug and Play function, we open the executors in the Setup area ① and connect the module to the CAN bus. The system automatically detects the new module and adds it to the ‘Setup’ area, ② where we are able to control the new module instantly.

[[File:DemoCase9.png|1000x800px]]

<hr>

−

+

Now we can set up these executors. In order to do this, enter the additional menu ① and activate the edit mode, by pressing the appropriate icon .

Now we are in the edit mode ②, which can be seen from the appropriate notification in the top part of the screen. In this mode, when we press and hold an icon, we can move it among other elements and place it into another Room by placing it in the Area-choosing Menu and then choosing the area that we need. A long press ③ of the element starts the menu, from which we set up the current element.In the ‘General’ ④ section we can change the name of the element, add a voice command for it, change an icon or add the element to ‘Favorites’.

[[File:DemoCase10.png|1000x800px]]

<hr>

−

+

‘Auto’ section ① lets us activate the automation with a few clicks, as well as set up its parameters.

Line 109: Line 116:

[[File:DemoCase11.png|1000x800px]]

<hr>

−

+

In order to do this, ① we press the button we need to bind. The system displays it, after which we press ‘Bind’② and save the changes. Now this button controls the executor

The ‘Switches’ tab ③ also features additional button setup options. For example, we can program the executor to be controlled with a double or triple click of a button, as well as define an action performed by this, for example ‘only turning on’ or ‘only turning off’ an executor. In this case we are setting up the button to do the following: one click will cause the lamp to toggle, a double click will turn it on and a triple click will turn it off. In this way a single button can perform up to five different actions.

[[File:DemoCase12.png|1000x800px]]

<hr>

−

+

Let’s also set up basic automation of turning an executor on or off with the help of a motion sensor.

Line 122: Line 131:

[[File:DemoCase13.png|1000x800px]]

<hr>

−

+

Now we will activate turning off ① of an executor if there is no motion: we choose the same sensor, set a lower threshold and a minimal time.Save the changes.

The extra ‘A’ icon ② will be added to the executor icon, meaning that automation has been set up for it. Now the lamp will be turned on when motion is detected and instantly turned off when no motion is detected.

[[File:DemoCase14.png|1000x800px]]

<hr>

−

+

Let’s create a light scheme. For this we need to select the appropriate item in the additional menu ①. Give the light scheme a name ②.

[[File:DemoCase15.png|1000x800px]]

<hr>

−

+

In the ‘State’ tab, use a long press to add the lights we want to use into the light scene ① and set up their state ②. ‘Auto’, ‘Schedule’, ‘Switch’ tabs are the same for all the executors.

Save the changes and we are able to use the newly-created light scheme ③ immediately.

[[File:DemoCase16.png|1000x800px]]

<hr>

−

+

While you are in the Edit Mode, there is a ‘Setup’ ① icon in the additional menu.

Here in the ‘Structure’② tab we can see all the areas.

Line 142: Line 155:

[[File:DemoCase17.png|1000x800px]]

<hr>

−

+

In the ‘Mikrotik’ tab ① you can see the current parameters of your router, which you can also connect to your local Wi-Fi network.

In order to do this, enter the Wi-Fi sub-menu, click the wlan1 interface configuration ②, after which choose the ‘station’ mode, choose a Wi-Fi network out of the list ③ of available ones and enter the connection password.

[[File:DemoCase18.png|1000x800px]]

<hr>

−

+

In the ‘Backups’ tab ① you can see the list of saved configurations, which can be restored if necessary.

[[File:DemoCase19.png|1000x800px]]

<hr>

−

+

For cloud access to the device, you do not need any extra settings. The app detects the absence of the system in your local network and automatically establishes the connection via the cloud.

[[File:DemoCase20.jpg|800x600px]]

−

<hr>

−

+

We thank you for watching this tutorial! If you have questions or need extra help, please do not hesitate to refer to our technical support team. See you in the next episodes!

+

</translate>

Support

editor, Interface administrators, Administrators, translation-admin, translator

9,750

edits

Changes

Quick Start Guide (view source)

Revision as of 12:37, 31 October 2023

Navigation menu

Search