Changes

Jump to navigation Jump to search
2,428 bytes added ,  13:55, 17 August 2021
Created page with "{{RevisionChanger | hasA = 1 | hasB = 1}} {{Infobox module | name = FW-WL.B | image = FW-WLB.jpg | voltage = 9-12 V DC | dim = 18x18x20 mm }} ==ON-THE-FL..."
{{RevisionChanger | hasA = 1 | hasB = 1}}
{{Infobox module
| name = FW-WL.B
| image = FW-WLB.jpg
| voltage = 9-12 V DC
| dim = 18x18x20 mm
}}

==ON-THE-FLOOR LEAKAGE SENSOR==

The sensor is placed on the floor surface. It has an alarm light, which
changes from green to red if the sensor detects water on the floor.
Used together with DW-WL02 or BW-LSA modules.

==Example of connection==

[[File:FWWLB EXA.jpg|400px]]

==Connectors==

[[File:FWWLB CON.png|400px]]

==Module parameters==

{{ Mp
| power = 9-12 V DC
| maxcur24v = 20 mA
| compatible = MF-10<br><br>DW-WL02/HTxx<br>BW-LSA
| instalation = Free
| case = ABS
| protection = IP64
| temprange = -10 … +50 °C
| size = 18x18x20 mm
| weight = 20g
}}

==HW settings==
{|class="wikitable"
|-
!Name!!Type, range!!SUBID!!Default!!Description
|-
|c0||int[4]||sensors subId||0;0;255;15||Normal state color in format 'red;green;blue;blink'
red, green, blue – 0..255;
blink:
*0 – pulse
*1 – blink per 2 seconds
*2 – blink per second
*15 – constant glow
Example:
<syntaxhighlight lang="xml" line>
c0='150;150;255;0'
</syntaxhighlight>
|-
|c1||int[4]||sensors subId||0;0;255;15||On-start color in format 'red;green;blue;blink'
red, green, blue – 0..255;
blink:
*0 – pulse
*1 – blink per 2 seconds
*2 – blink per second
*15 – constant glow
Example:
<syntaxhighlight lang="xml" line>
c1='150;150;255;0'
</syntaxhighlight>
|-
|c2||int[4]||sensors subId||255;100;0;15||'Leak was previously reported' color in format 'red;green;blue;blink'
red, green, blue – 0..255;
blink:
*0 – pulse
*1 – blink per 2 seconds
*2 – blink per second
*15 – constant glow
Example:
<syntaxhighlight lang="xml" line>
c2='150;150;255;0'
</syntaxhighlight>
|-
|c3||int[4]||sensors subId||255;0;0;15||On-leak color in format 'red;green;blue;blink'
red, green, blue – 0..255;
blink:
*0 – pulse
*1 – blink per 2 seconds
*2 – blink per second
*15 – constant glow
Example:
<syntaxhighlight lang="xml" line>
c3='150;150;255;0'
</syntaxhighlight>
|-
|sens||int||sensors subId||128||Sensor sensitivity
Example:
<syntaxhighlight lang="xml" line>
sens='180'
</syntaxhighlight>
|}

* Removing HW does not return the above parameters to their default values.To return to their default values, they must be set explicitly.
** Green and blue cannot be used at the same time. Green has priority.

Navigation menu