Changes

Jump to navigation Jump to search
1,067 bytes added ,  06:26, 25 August 2021
no edit summary
Line 1: Line 1: −
# Connect DE-MG/Metaforsa to the local network and other devices via CAN bus.
+
<ol class="l2">
# Power on the DE-MG/Metaforsa module and make sure that the power indicator light on the module is green.
+
<li>Connect DE-MG/Metaforsa to the local network and other devices via CAN bus.</li>
# Use the PC browser to open the web interface of the DE-MG/Metaforsa system configuration <nowiki>http://192.168.1.111</nowiki> (login: admin; password: admin by default). Make sure that your PC is applied to the same local network as the DE-MG/Metaforsa module and that the local network uses the address 192.168.1.x (otherwise follow the instruction to change the IP address).
+
<li>Power on the DE-MG/Metaforsa module and make sure that the power indicator light on the module is green.</li>
# Update the system in the Updates section if needed.
+
<li>Use the PC browser to open the web interface of the DE-MG/Metaforsa system configuration http://192.168.1.111 (login: admin; password: admin by default).<br>[[File:1.png|500px]]<br>
# Install the Larnitech application from Appstore or PlayMarket to your tablet or smartphone.
+
Make sure that your PC is applied to the same local network as the DE-MG/Metaforsa module and that the local network uses the address 192.168.1.x (otherwise follow the instruction [http://wiki.larnitech.com/documentation/how-to/setup-configuration/router-setup/ to change the IP address]).</li>
# Make sure that your tablet/smartphone is connected to the same local Wi-Fi network which the DE-MG/Metaforsa module is registered on. Start the application and enter the following parameters that will appear in the Settings field.
+
<li>Update the system in the Updates section if needed.</li>
## Choose the language.
+
<li>Install the Larnitech application from Appstore or PlayMarket to your tablet or smartphone.</li>
## Set the ‘Connection’ parameter to ‘Local’.
+
<li>Make sure that your tablet/smartphone is connected to the same local Wi-Fi network which the DE-MG/Metaforsa module is registered on. Start the application and enter the following parameters that will appear in the Settings field. <ol type="I">
## Your DE-MG/Metaforsa server should appear under the ‘Servers list’. Choose it, then apply the settings by clicking ‘Next’.
+
<li>Choose the language.</li>
## Available elements will be shown in the Setup field.
+
<li>Set the 'Connection' parameter to 'Local'.</li>
# Using the web interface, go to the Modules section, where available modules will be shown. If necessary, use the ‘Update HW’ button to configure each of them for working with the equipment connected to them.
+
<li>Your DE-MG/Metaforsa server should appear under the 'Servers list'. Choose it, then apply the settings by clicking ‘Next’.</li>
# Power on the equipment connected to the net and make sure it works correctly.
+
<br>[[File:2.jpg|500px]]
# Use the Setup section of the application or the Structure section of the web interface in order to create areas, place the elements in the areas and configure the settings.
+
<li>Available elements will be shown in the Setup field.</li></ol></li>
# Bind the buttons to the load according to the instruction Binding buttons to the load.
+
<li>Using the web interface, go to the Modules section, where available modules will be shown. If necessary, use the ‘Update HW’ button to configure each of them for working with the equipment connected to them.<br>
# If necessary, create light schemes according to the instruction Turning on and setting up the light scheme.
+
[[File:3.png|500px]]
# If necessary, set up the automatization according to the instruction Automatization settings.
+
<br>
# Add and set up the equipment remote control according to the instruction.
+
[[File:4.png|500px]]</li>
# Add video surveillance cameras according to the instruction Adding video surveillance cameras to the interface.
+
<li>Power on the equipment connected to the net and make sure it works correctly.</li>
# Add scenarios according to the instruction Adding standard scripts.
+
<li>Use the Setup section of the application or the Structure section of the web interface in order to create areas, place the elements in the areas and configure the settings.</li>
# Set up the connection to the cloud service according to the instruction.
+
<li>Bind the buttons to the load according to the instruction [http://wiki.larnitech.com/documentation/how-to/setup-configuration/binding-buttons/ Binding buttons to the load].</li>
# Add and set up the necessary plugins. The plugin list and setup instruction can be found by following the link Plugin connection and setup.
+
<li>If necessary, create light schemes according to the instruction [http://wiki.larnitech.com/documentation/how-to/setup-configuration/lighting-scenarios/ Turning on and setting up the light scheme].</li>
# Change the security settings by changing the password to the web interface and system access key according to the instruction.
+
<li>If necessary, set up the automatization according to the instruction [http://wiki.larnitech.com/documentation/how-to/setup-configuration/automation-settings/ Automatization settings].</li>
# Enjoy
+
<li>Add and set up the equipment remote control according to the [http://wiki.larnitech.com/documentation/how-to/adding-and-learning-remotes/ instruction].</li>
 +
<li>Add video surveillance cameras according to the instruction [http://wiki.larnitech.com/documentation/how-to/adding-video-cameras-to-the-interface/ Adding video surveillance cameras to the interface].</li>
 +
<li>Add scenarios according to the instruction [http://wiki.larnitech.com/documentation/how-to/adding-standard-scripts/ Adding standard scripts].</li>
 +
<li>Set up the connection to the cloud service according to the [http://wiki.larnitech.com/documentation/how-to/connection-to-the-cloud-service/ instruction].</li>
 +
<li>Add and set up the necessary plugins. The plugin list and setup instruction can be found by following the link [http://wiki.larnitech.com/documentation/how-to/plugins/ Plugin connection and setup].</li>
 +
<li>Change the security settings by changing the password to the web interface and system access key according to the [http://wiki.larnitech.com/documentation/how-to/change-password/ instruction].</li>
 +
<li>Enjoy</li>
 +
</ol>

Navigation menu