editor, Interface administrators, Administrators, translation-admin, translator
9,750
edits
Changes
Jump to navigation
Jump to search
m
LED-AMP
Line 1:
Line 1:
−<languages/>
−<translate>
{{RevisionChanger | hasA = 1 | hasC = 1}}+
==Example of connection RGB LED with Amp== <!--T:7-->+
−<!--T:8-->
−[[File:RGBC EXA2.png|500px]]
−
−| maxperdev = 3A (36W at 12V)+| maxcur24v = 25 mA
−| bustype = CAN (4-wire)
#Connect the CAN connector.
#Disconnect the CAN connector.
==HW settings== <!--T:15-->
−{|class="wikitable"
−|-
−!Name!!Type, range!!SUBID!!Default!!Description
−|-
−|dm||char[3]||98||'RGB'||Each char is responsible for the type of a particular channel, RGB takes 3 channels
−*'D' – use like dimmer-lamp
−*'RGB' – Use like RGB lamp
−Example: dm='DDD'
−|-
−|def||integer 0-250||1-3||100||The default brightness level in case of a power reset (1..250). Example: def=250
−|-
−|min||integer 0-100||1-3||0||Minimum dimming level, example: min=10
−|-
−|max||integer 0-100||1-3||100||Maximum dimming level, example max=95
−|-
−|runtime||integer 0-100||98||5||Runtime is the speed of changing the brightness(measured in seconds). Example: runtime=15
−|-
−|f||integer 1-1000||98||500||It is frequency (measured in Hz); Example: f=500
−|}
−<!--T:16-->
−<syntaxhighlight lang="xml" line>
−<item addr="355:1" auto-period="600" cfgid="175" name="Dimmer" type="dimer-lamp" uniq_id="68"/>
−<item addr="355:2" auto-period="600" cfgid="175" name="Dimmer" type="dimer-lamp" uniq_id="69"/>
−<item addr="355:3" auto-period="600" cfgid="175" name="Dimmer" type="dimer-lamp" uniq_id="70"/>
−<item addr="355:98" cfgid="175" hw="dm='DDD' f=1000 runtime=20" name="Temperature" system="yes" type="temperature-sensor" uniq_id="47"/>
−</syntaxhighlight>
−</translate>
<!--T:1-->
<!--T:1-->
−{{Infobox module
{{Infobox module
−| name = BW-RGB.C
+| name = LED-AMP
−| image = BW-RGBC.png
+| image = LED-AMP.png
−| outCount = 3
+| outCount = 4
−| peakl = 1A (12W at 12V)
+| peakl = ?
−| voltage = 11.5...27.5 V DC
+| voltage = ? V DC
−| dim = 45x42x14 mm
+| dim = ? mm
}}
}}
−==3-CHANNEL LED CONTROLLER== <!--T:2-->
+==4-CHANNEL LED Driver== <!--T:2-->
<!--T:3-->
<!--T:3-->
−This module allows controlling RGB strip or three monochrome LED strips.
+This module allows interpretation of controlling signals from IO connections for 12/24V LED/RGB strips.
<!--T:4-->
<!--T:4-->
Line 37:
Line 35:
<!--T:6-->
<!--T:6-->
−[[File:RGBC EXA.png|500px]]
+[[File:LED-AMP_connection_scheme.png|800px]]
−==Module parameters== <!--T:7-->
−==Module parameters== <!--T:9-->
<!--T:10-->
<!--T:10-->
{{ Mp
{{ Mp
−| outqty = 3
+| outqty = 4
| involtage = 11.5 … 25V
| involtage = 11.5 … 25V
| currtype = DC
| currtype = DC
| adjtype = PWM
| adjtype = PWM
−| maxperch = 1A (12W at 12V)
+| maxperch = ?
−| power = 11.5 … 27.5 V DC
−| power = 11.5 … 27.5 V DC from CAN
−| instalation = Free
| instalation = Free
| case = ABS
| case = ABS
| protection = IP40
| protection = IP40
| temprange = -10 … +50 °C
| temprange = -10 … +50 °C
−| size = 45x42x14 mm
+| size = ? mm
−| weight = 25 g
+| weight = ? g
}}
}}
−==Module installation and connection procedure== <!--T:11-->
+==Module installation and connection procedure== <!--T:8-->
−<!--T:12-->
+<!--T:9-->
#Connect the outputs.
#Connect the outputs.
−#Configure the module using LT setup.
#Configure the module using LT setup.
#Apply power to the load.
#Apply power to the load.
#Check all equipment for proper operation.
#Check all equipment for proper operation.
−==Module shut-off and deinstallation procedure== <!--T:13-->
+==Module shut-off and deinstallation procedure== <!--T:10-->
−<!--T:14-->
+<!--T:11-->
#Disconnect the power from the load.
#Disconnect the power from the load.
−#Disconnect the outputs.
#Disconnect the outputs.
−