1,970
edits
Changes
Jump to navigation
Jump to search
no edit summary
Line 85:
Line 85:
#Connect the X1 connector.
#Apply power to the load.
#Disconnect the CAN connector.
==Module installation and connection procedure==
==Module installation and connection procedure==
#Install the module in the switchboard on the DIN rail and fix it with the special latch on the module base.
#Install the module in the switchboard on the DIN rail and fix it with the special latch on the module base.
+#Connect the X1 connector.
#Connect the CAN connector.
#Connect the CAN connector.
−#Configure the module using LT setup.
#Configure the module using LT setup.
−#Check all equipment for proper operation.
#Check all equipment for proper operation.
==Module shut-off and deinstallation procedure==
==Module shut-off and deinstallation procedure==
−#Disconnect the power from the load.
+#Disconnect the CAN connector.
#Disconnect the X1 connector.
#Disconnect the X1 connector.
−#Remove the module from the DIN rail, releasing the latch at the bottom of the module base.
#Remove the module from the DIN rail, releasing the latch at the bottom of the module base.