1,970
edits
Changes
Jump to navigation
Jump to search
Line 80:
Line 80: + − #Connect the X1 connector. − #Apply power to the load. − + − #Disconnect the CAN connector.
no edit summary
==Module installation and connection procedure==
==Module installation and connection procedure==
#Install the module in the switchboard on the DIN rail and fix it with the special latch on the module base.
#Install the module in the switchboard on the DIN rail and fix it with the special latch on the module base.
#Connect the X1 connector.
#Connect the CAN connector.
#Connect the CAN connector.
#Configure the module using LT setup.
#Configure the module using LT setup.
#Check all equipment for proper operation.
#Check all equipment for proper operation.
==Module shut-off and deinstallation procedure==
==Module shut-off and deinstallation procedure==
#Disconnect the power from the load.
#Disconnect the CAN connector.
#Disconnect the X1 connector.
#Disconnect the X1 connector.
#Remove the module from the DIN rail, releasing the latch at the bottom of the module base.
#Remove the module from the DIN rail, releasing the latch at the bottom of the module base.