Difference between revisions of "WW-WL.B"

From Larnitech wiki page
Jump to navigation Jump to search
 
(One intermediate revision by the same user not shown)
Line 2: Line 2:
 
<translate>
 
<translate>
 
<!--T:1-->
 
<!--T:1-->
−
{{RevisionChanger | hasA = 1 | hasB = 1}}
 
 
{{Infobox module
 
{{Infobox module
−
| name      = FW-WL.B
+
| name      = WW-WL.B
 
| image      = WW-WLB.png
 
| image      = WW-WLB.png
 
| voltage    = 9-12 V DC
 
| voltage    = 9-12 V DC
Line 24: Line 23:
  
 
<!--T:6-->
 
<!--T:6-->
−
[[File:FWWLB EXA.jpg|400px]]
+
[[File:WWWLB_EXA.png|400px]]
−
 
 
  
 
==Module parameters== <!--T:9-->
 
==Module parameters== <!--T:9-->
Line 47: Line 45:
 
!Name!!Type, range!!SUBID!!Default!!Description
 
!Name!!Type, range!!SUBID!!Default!!Description
 
|-
 
|-
−
|c0||int[4]||sensors subId||0;0;255;15||Normal state color in format 'red;green;blue;blink'
+
 
−
red, green, blue – 0..255;
 
−
blink:
 
−
*0 – pulse
 
−
*1 – blink per 2 seconds
 
−
*2 – blink per second
 
−
*15 – constant glow
 
−
Example:
 
−
<syntaxhighlight lang="xml" line>
 
−
c0='150;150;255;0'
 
−
</syntaxhighlight>
 
−
|-
 
−
|c1||int[4]||sensors subId||0;0;255;15||On-start color in format 'red;green;blue;blink'
 
−
red, green, blue – 0..255;
 
−
blink:
 
−
*0 – pulse
 
−
*1 – blink per 2 seconds
 
−
*2 – blink per second
 
−
*15 – constant glow
 
−
Example:
 
−
<syntaxhighlight lang="xml" line>
 
−
c1='150;150;255;0'
 
−
</syntaxhighlight>
 
−
|-
 
−
|c2||int[4]||sensors subId||255;100;0;15||'Leak was previously reported' color in format 'red;green;blue;blink'
 
−
red, green, blue – 0..255;
 
−
blink:
 
−
*0 – pulse
 
−
*1 – blink per 2 seconds
 
−
*2 – blink per second
 
−
*15 – constant glow
 
−
Example:
 
−
<syntaxhighlight lang="xml" line>
 
−
c2='150;150;255;0'
 
−
</syntaxhighlight>
 
−
|-
 
−
|c3||int[4]||sensors subId||255;0;0;15||On-leak color in format 'red;green;blue;blink'
 
−
red, green, blue – 0..255;
 
−
blink:
 
−
*0 – pulse
 
−
*1 – blink per 2 seconds
 
−
*2 – blink per second
 
−
*15 – constant glow
 
−
Example:
 
−
<syntaxhighlight lang="xml" line>
 
−
c3='150;150;255;0'
 
−
</syntaxhighlight>
 
−
|-
 
 
|sens||int||sensors subId||128||Sensor sensitivity
 
|sens||int||sensors subId||128||Sensor sensitivity
 
Example:
 
Example:
Line 106: Line 57:
 
<!--T:12-->
 
<!--T:12-->
 
* Removing HW does not return the above parameters to their default values.To return to their default values, they must be set explicitly.
 
* Removing HW does not return the above parameters to their default values.To return to their default values, they must be set explicitly.
−
** Green and blue cannot be used at the same time. Green has priority.
 
 
</translate>
 
</translate>

Latest revision as of 09:50, 18 August 2022


WW-WL.B
WW-WLB.png
Other
Supply voltage9-12 V DC
Dimentions57x47x22 mm


WALL LEAKAGE SENSOR

The sensor is placed on the wall. Used together with DW-WL02 or BW-LSA modules.

Features

  • Sensor presence detection
  • Adjusting the sensor sensitivity
  • Connections of several sensors to one bus

Example of connection

WWWLB EXA.png

Module parameters

Parameter name Value
Input channels qty
Input/output channels qty
0-10 input port quantity
Buttons
LED Buttons
Number of sensor inputs
Number of dry contact inputs
RS485 ports qty
RS232 ports qty
UART ports qty
M-BUS port quantity
Pulse inputs quantity
DALI ports qty
DALI-line voltage supply
Peak current of DALI-line power supply
Peak current in DALI-line
Maximum DALI devices quantity
Dimming channels qty
Output channels qty
0-10 output port quantity
Analog output channels qty
Output
Digital line maximum length
Discrete input channels qty
Digital input channels qty
Speakers
Max power output audio channel
Camera
IR lighting
Card reader
Connection type
Protocols
Backlight voltage
Load type
Dimmer load type
Supported sensors
Input voltage
Current type
Adjustment type
Max load
Min load
Max load per channel
Max load per group
Max load per device
Control parameters
Angle of vision IR °
Angle of motion °
Temperature measuring range °C
Humidity measuring range
Dimmer type
Dimming type
Voltage that may be applied to the input channels
Max output switching voltage
Max output switching current
Power supply 9-12 V DC
Max current(24V) 20 mA
Max current(13V)
Max detection distance
Max IR distance
Max BT distance
Max current
Relay
Data transfer speed
Permissible section of power supply cable to connect in socket:
Sensors VCC output
Sensors max VCC current
R1-R2 inputs max current
Push-button/reed switches line recommended length
Temperature sensor line max length
Sensor cable length
Sensors line max length
Bus type
Compatible with Metaforsa devices
DW-WL02/HTxx
BW-LSA
Output voltage
Output current
Equipment installation type Free
Mounting
Max cabel lenght
Case material ABS
Protection IP64
Temperature range -10 … +50 °C
Size 57x47x22 mm
Weight 35g
* -
** -
*** -
1 -
2 -
3 -


HW settings

Name Type, range SUBID Default Description
sens int sensors subId 128 Sensor sensitivity

Example: 

1sens='180'
test int(0,1) sensors subId 1 0 - Disable the test signal to detect the presence of the sensor
  • Removing HW does not return the above parameters to their default values.To return to their default values, they must be set explicitly.
Retrieved from "https://wiki.larnitech.com/index.php?title=WW-WL.B&oldid=10763"