editor, Interface administrators, Administrators, translation-admin, translator
9,750
edits
Changes
no edit summary
<languages/>
<translate>
<!--T:1-->
{{RevisionChanger | hasA = 1 | hasC = 1}}
{{RevisionChanger | hasA = 1 | hasC = 1}}
{{Infobox module
{{Infobox module
}}
}}
==LEAKAGE SENSOR ADAPTER==
==LEAKAGE SENSOR ADAPTER== <!--T:2-->
<!--T:3-->
Allows connecting two leakage sensors, has the function of detecting
Allows connecting two leakage sensors, has the function of detecting
the presence of the sensor
the presence of the sensor
<!--T:4-->
<div class="caution">
<div class="caution">
CAUTION! All work related to the installation, connection, setting up, service and support must be carried out by qualified personnel with sufficient skills and experience in working with electrical equipment.
CAUTION! All work related to the installation, connection, setting up, service and support must be carried out by qualified personnel with sufficient skills and experience in working with electrical equipment.
</div>
</div>
==Example of connection==
==Example of connection== <!--T:5-->
<!--T:6-->
[[File:LSAC EXA.png|400px]]
[[File:LSAC EXA.png|400px]]
==Module parameters==
==Module parameters== <!--T:7-->
<!--T:8-->
{{ Mp
{{ Mp
| inqty = 2
| inqty = 2
| power = 11.5 … 27.5 V DC from CAN
| power = 11.5 … 27.5 V DC from CAN
| maxcur24v = 65 mA
| maxcur24v = 65 mA
| bustype = CAN (4-wire)
| bustype = CAN (4-wire)
| compatible = EW-WL, FW-WL
| compatible = EW-WL, FW-WL
| outvoltage = 8-14V
| outvoltage = 8-14V
| outcurrent = 20 mA
| outcurrent = 20 mA
| smaxlen = 50m
| instalation = Free
| instalation = Free
| case = ABS
| case = ABS
}}
}}
==Module installation and connection procedure==
==Module installation and connection procedure== <!--T:9-->
<!--T:10-->
#Connect the inputs.
#Connect the inputs.
#Connect the CAN connector.
#Connect the CAN connector.
#Check all equipment for proper operation.
#Check all equipment for proper operation.
==Module shut-off and deinstallation procedure==
==Module shut-off and deinstallation procedure== <!--T:11-->
<!--T:12-->
#Disconnect the CAN connector.
#Disconnect the CAN connector.
#Disconnect the inputs.
#Disconnect the inputs.
==HW settings==
==HW settings== <!--T:13-->
{|class="wikitable"
{|class="wikitable"
|-
|-
*'S' – Leak, on-the-floor (FW-WL.B) leakage sensor
*'S' – Leak, on-the-floor (FW-WL.B) leakage sensor
*'-'-none
*'-'-none
Example: leak='LLLL'
Example: leak='LL'
|}
|}
<!--T:14-->
<syntaxhighlight lang="xml" line>
<syntaxhighlight lang="xml" line>
<item addr="312:11" cfgid="67" name="Leak" type="leak-sensor" uniq_id="84"/>
<item addr="312:11" cfgid="67" name="Leak" type="leak-sensor" uniq_id="84"/>
<item addr="312:98" cfgid="67" hw="leak='LN'" name="Temperature" system="yes" type="temperature-sensor" uniq_id="86"/>
<item addr="312:98" cfgid="67" hw="leak='LN'" name="Temperature" system="yes" type="temperature-sensor" uniq_id="86"/>
</syntaxhighlight>
</syntaxhighlight>
</translate>