editor, Interface administrators, Administrators, translation-admin, translator
9,706
edits
Changes
Jump to navigation
Jump to search
mLine 7:
Line 7: − + Line 35:
Line 35: − + Line 42:
Line 42: − + − + − | maxperdev = 3A (36W at 12V)+ − − | maxcur24v = 25 mA − + Line 61:
Line 59: − + Line 70:
Line 68: − − ==HW settings== <!--T:12--> − {|class="wikitable" − |- − !Name!!Type, range!!SUBID!!Default!!Description − |- − |dm||char[3]||98||'RGB'||Each char is responsible for the type of a particular channel, RGB takes 3 channels − *'D' – use like dimmer-lamp − *'RGB' – Use like RGB lamp − Example: dm='DDD' − |- − |def||integer 0-250||1-3||100||The default brightness level in case of a power reset (1..250). Example: def=250 − |- − |min||integer 0-100||1-3||0||Minimum dimming level, example: min=10 − |- − |max||integer 0-100||1-3||100||Maximum dimming level, example max=95 − |- − |runtime||integer 0-100||98||5||Runtime is the speed of changing the brightness(measured in seconds). Example: runtime=15 − |- − |f||integer 1-1000||98||500||It is frequency (measured in Hz); Example: f=500 − |} − − <!--T:16--> − <syntaxhighlight lang="xml" line> − <item addr="355:1" auto-period="600" cfgid="175" name="Dimmer" type="dimer-lamp" uniq_id="68"/> − <item addr="355:2" auto-period="600" cfgid="175" name="Dimmer" type="dimer-lamp" uniq_id="69"/> − <item addr="355:3" auto-period="600" cfgid="175" name="Dimmer" type="dimer-lamp" uniq_id="70"/> − <item addr="355:98" cfgid="175" hw="dm='DDD' f=1000 runtime=20" name="Temperature" system="yes" type="temperature-sensor" uniq_id="47"/> − </syntaxhighlight>
Edit involtage
| peakl = 3A
| peakl = 3A
| voltage = 12/24 V DC
| voltage = 12/24 V DC
| dim = ??x??x?? mm
| dim = 65x18x15 mm
}}
}}
<!--T:6-->
<!--T:6-->
[[File:LED-DRV_connection_scheme.png|800px]]
[[File:LED-DRV_connection_scheme.png|600px]]
==Module parameters== <!--T:7-->
==Module parameters== <!--T:7-->
{{ Mp
{{ Mp
| outqty = 4
| outqty = 4
| involtage = 11.5 … 25V
| involtage = 5V
| currtype = DC
| currtype = DC
| adjtype = PWM
| adjtype = PWM
| maxperch = 1A (12W at 12V)
| maxperch = 3A
| power = 11.5 … 27.5 V DC
| power = 11.5 … 27.5 V DC from CAN
| instalation = Free
| instalation = Free
| case = ABS
| case = ABS
| protection = IP40
| protection = IP40
| temprange = -10 … +50 °C
| temprange = -10 … +50 °C
| size = 45x42x14 mm
| size = 65x18x15 mm
| weight = 25 g
| weight = 25 g
}}
}}
<!--T:9-->
<!--T:9-->
#Connect the outputs.
#Connect the outputs.
#Configure the module using LT setup.
#Configure the module using LT Setup.
#Apply power to the load.
#Apply power to the load.
#Check all equipment for proper operation.
#Check all equipment for proper operation.
#Disconnect the power from the load.
#Disconnect the power from the load.
#Disconnect the outputs.
#Disconnect the outputs.