Difference between revisions of "Translations:Fancoil/3/en"

From Larnitech wiki page
Jump to navigation Jump to search
(Importing a new version from external source)
 
(No difference)

Latest revision as of 15:09, 24 January 2022

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Fancoil)
{|class="wikitable"
|-
!Name!!type and variety!!description!!default value
|-
|temperature-sensors||list||list of valve temperature sensors (for automation)||-
|-
|automation||string||name of current automation mode||-
|-
|valve||string (addr)||addr of valve||-
|-
|valve-heating||string (addr)||addr of heating valve||-
|-
|valve-cooling||string (addr)||addr of cooling valve||-
|-
|temperature-lag||number||hysteresis range on either side from set-point temperature Set in automation tag. The decimal symbol is dot.||0.5
|-
|undefined-behavior||0-250/on/off/last||fancoil position in case of sensors readings absence (off – 0; on – 250)||last
|-
|P0||0-100||minimal power for turning on fan||last
|-
|mode||heat/cool||heat/cool mode||heat
|-
|alg||string||eco/fast/boost alg||-
|-
|heat-carrier||string (addr)||temperature sensor of heat carrier||-
|-
|limit-fan||number(0-250)|| max power||-
|-
|ctrl-change1||number(0-250)||min level of power change (one time per “ctrl-ticks” attr) if defined||5
|-
|ctrl-change2||number(0-250)||min level of power change||-
|-
|ctrl-ticks||number(0-3825)||power change by "ctrl-change1" timeout||-
|}
Translation{|class="wikitable"
|-
!Name!!type and variety!!description!!default value
|-
|temperature-sensors||list||list of valve temperature sensors (for automation)||-
|-
|automation||string||name of current automation mode||-
|-
|valve||string (addr)||addr of valve||-
|-
|valve-heating||string (addr)||addr of heating valve||-
|-
|valve-cooling||string (addr)||addr of cooling valve||-
|-
|temperature-lag||number||hysteresis range on either side from set-point temperature Set in automation tag. The decimal symbol is dot.||0.5
|-
|undefined-behavior||0-250/on/off/last||fancoil position in case of sensors readings absence (off – 0; on – 250)||last
|-
|P0||0-100||minimal power for turning on fan||last
|-
|mode||heat/cool||heat/cool mode||heat
|-
|alg||string||eco/fast/boost alg||-
|-
|heat-carrier||string (addr)||temperature sensor of heat carrier||-
|-
|limit-fan||number(0-250)|| max power||-
|-
|ctrl-change1||number(0-250)||min level of power change (one time per “ctrl-ticks” attr) if defined||5
|-
|ctrl-change2||number(0-250)||min level of power change||-
|-
|ctrl-ticks||number(0-3825)||power change by "ctrl-change1" timeout||-
|}
Name type and variety description default value
temperature-sensors list list of valve temperature sensors (for automation) -
automation string name of current automation mode -
valve string (addr) addr of valve -
valve-heating string (addr) addr of heating valve -
valve-cooling string (addr) addr of cooling valve -
temperature-lag number hysteresis range on either side from set-point temperature Set in automation tag. The decimal symbol is dot. 0.5
undefined-behavior 0-250/on/off/last fancoil position in case of sensors readings absence (off – 0; on – 250) last
P0 0-100 minimal power for turning on fan last
mode heat/cool heat/cool mode heat
alg string eco/fast/boost alg -
heat-carrier string (addr) temperature sensor of heat carrier -
limit-fan number(0-250) max power -
ctrl-change1 number(0-250) min level of power change (one time per “ctrl-ticks” attr) if defined 5
ctrl-change2 number(0-250) min level of power change -
ctrl-ticks number(0-3825) power change by "ctrl-change1" timeout -
Retrieved from "https://wiki.larnitech.com/index.php?title=Translations:Fancoil/3/en&oldid=8877"