Translations:Fancoil/3/en
Jump to navigation
Jump to search
| Name | type and variety | description | default value |
|---|---|---|---|
| temperature-sensors | list | list of valve temperature sensors (for automation) | - |
| automation | string | name of current automation mode | - |
| valve | string (addr) | addr of valve | - |
| valve-heating | string (addr) | addr of heating valve | - |
| valve-cooling | string (addr) | addr of cooling valve | - |
| temperature-lag | number | hysteresis range on either side from set-point temperature Set in automation tag. The decimal symbol is dot. | 0.5 |
| undefined-behavior | 0-250/on/off/last | fancoil position in case of sensors readings absence (off – 0; on – 250) | last |
| P0 | 0-100 | minimal power for turning on fan | last |
| mode | heat/cool | heat/cool mode | heat |
| alg | string | eco/fast/boost alg | - |
| heat-carrier | string (addr) | temperature sensor of heat carrier | - |
| limit-fan | number(0-250) | max power | - |
| ctrl-change1 | number(0-250) | min level of power change (one time per “ctrl-ticks” attr) if defined | 5 |
| ctrl-change2 | number(0-250) | min level of power change | - |
| ctrl-ticks | number(0-3825) | power change by "ctrl-change1" timeout | - |