Difference between revisions of "Connecting the Application to the System"

From Larnitech wiki page
Jump to navigation Jump to search
(Created page with "To connect the application to the Larnitech Smart Home system, make sure that the power cable and Ethernet are connected to the '''DE-MG''' or '''Metaforsa''' module. Connect...")
 
Line 7: Line 7:
 
</table>
 
</table>
 
<p>When you first start, the access code ('''Access Key''') used by default is 000000000000000. Further, you can use Web Toolbar of the Smart Home system administration ('''LT Setup''') in order to change it.  
 
<p>When you first start, the access code ('''Access Key''') used by default is 000000000000000. Further, you can use Web Toolbar of the Smart Home system administration ('''LT Setup''') in order to change it.  
<p>If you want to set up a remote or cloud connection method, see [[settings#Configuring_the_type_of_connection|Setting Up a Connection Method]].
+
<p>If you want to set up a remote or cloud connection method, see [[Settings#Configuring_the_type_of_connection|Setting Up a Connection Method]].
 
<p>If you choose '''Demo''' when you first log in, then the application will connect to the demo server. To return to the server selection menu, enter the menu (the button in the upper right corner) and select '''Settings'''.
 
<p>If you choose '''Demo''' when you first log in, then the application will connect to the demo server. To return to the server selection menu, enter the menu (the button in the upper right corner) and select '''Settings'''.

Revision as of 07:14, 4 October 2021

To connect the application to the Larnitech Smart Home system, make sure that the power cable and Ethernet are connected to the DE-MG or Metaforsa module. Connect to the same local network as the module. Open the application and you will see a screen with a list of available servers. Select your server (left screenshot). The selected server will move to the Current Server row. Click the Next button (right screenshot).

Instruction3.png Instruction4.png

When you first start, the access code (Access Key) used by default is 000000000000000. Further, you can use Web Toolbar of the Smart Home system administration (LT Setup) in order to change it.

If you want to set up a remote or cloud connection method, see Setting Up a Connection Method.

If you choose Demo when you first log in, then the application will connect to the demo server. To return to the server selection menu, enter the menu (the button in the upper right corner) and select Settings.